Course Search Results
Course Search Results
We strive to create, engaging, innovative and dynamic media solutions to Network Rail’s agreed quality and safety standards encompassing blended learning, technology based training delivery methods, experiential and discovery learning.
City & Guild 2391-51 Level 3 Award in Period Inspection, Te...
Any delegates wishing to attend this course ideally would have completed the C&G 2382 (17th Edition) prior to July 2018 or the C&G (18th Edition) fro...
Course Type:
Read More
City & Guilds 2377 - Portable Appliance Testing
We recommend that delegates have an up to date copy of the IEE code of practice for In-service Inspection and Testing of Electrical Equipment. The followi...
Course Type:
Read More
Copper Telecoms Cable Testing
Introduction Features of telephone and other copper comms cabling and networks, network topologies • Basic Electrical Theory Voltage, current and res...
Course Type:
Read More
DC Electrified Lines Testing and Strapping - Level 'B'
Training covering duties of certified staff to test that the conductor rail is not energized and to fit short-circuiting straps (strapping).
Course Type:
Read More
Electrical Testing of Signalling Power Distribution Equipme...
This course is aimed at team leader level and above and provides the training to deliver the periodic inspection & test requirements of the maintenance w...
Course Type:
Read More
Electrical Testing of Signalling Power Distribution Equipme...
This is to supplement current holders of Plant 17 with additional IT SPS testing knowledge. This training course is aimed at existing Plant 17 holders to ...
Course Type:
Read More
Face Fit Briefing: Module 3 Face Fit Testing
Learn about the dangers associated with respiratory hazards, how to mitigate the risks by using simple steps and how to test tight fitting RPE.
Course Type:
Read More
Failure and Incident Testing (Level 1)
Understand the procedures that are for the reporting and recording of wrong side failures. Understand how to recognise the implications of the failures sympt...
Course Type:
Read More
Failure and Incident Testing (Level 2)
Which procedures give guidelines and instructions relating to the response to signalling failures.How to verify the symptoms of a failure which were apparent...
Course Type:
Read More
Installation and Testing of Semi-Automatic Track Warning Sy...
At the end of the training, delegates will be able to carry out installation faulting, testing, and preventative and corrective maintenance on the Fixed Semi...
Course Type:
Read More
Introduction to Signalling Testing Processes
This training course will provide an understanding to why testing is required and the associated risks that can be caused if not undertaken correctly. This c...
Course Type:
Read More
Liquid Penetrant Testing
To train delegates who are responsible for undertaking Liquid Penetrant Testing (LPT) training as part of their duties on Network Rail Infrastructure.
Course Type:
Read More
Liquid Penetrant Testing - Recertification
To recertificate personnel who are currently certificated in liquid penetrant inspection.
Course Type:
Read More
Magnetic Particle Testing
To train delegates who are responsible for undertaking Magnetic Particle Testing (MPT) training as part of their duties on Network Rail Infrastructure.
Course Type:
Read More
Magnetic Particle Testing - Recertification
To recertificate personnel who are currently certificated in magnetic particle testing.
Course Type:
Read More
Non-Destructive Testing Level 2 Supervisor
For individuals responsible for undertaking and supervising the ultrasonic testing of rail in track and the assessment of Level 1 qualified URFDO's.
Course Type:
Read More
Principles of Testing and Commissioning on Telecoms equipment
This course gives an overall introduction to the principles and theory of Testing and Commissioning within the Network Rail environment. The course will focu...
Course Type:
Read More
SMTH.b Aspect Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the Aspect testing defined tests covered in the Signal Maintenance testing Handbook.
Course Type:
Read More
SMTH.c Points Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the Point testing defined tests covered in the Signal Maintenance testing Handbook.
Course Type:
Read MoreSMTH.d Cable Function Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the cable function testing as defined in the Signal Maintenance testing Handbook. &...
Course Type:
Read More
SPS 02.03 Periodic Electrical Testing of Signaling Power S...
This course is aimed at team leader level and above and provides the training to deliver the periodic inspection & test requirements of the maintenance w...
Course Type:
Read More
Signal Works Testing Module 2
Provides the underpinning knowledge and practical experience of the requirements and processes needed to perform Signalling Works Testing Mod 2 Principles te...
Course Type:
Read More
Signal Works Testing Module 3A
Develops understanding of the requirements and processes needed to perform Signalling Works Verification Testing.
Course Type:
Read More
Signal Works Testing Module 3BI
Provides training on carrying out Signal Works Testing, Functional Tester (Interlockings) Mod 3BI duties for the testing of interlocking type circuits in equ...
Course Type:
Read More
Signal Works Testing Module 3BL
Develops knowledge, understanding and skills of the requirements and processes needed to perform Signalling Works Functional Testing.
Course Type:
Read More
Signal Works Testing Module 3C
Provides knowledge and understanding to perform Signalling Works Verification Testing Mod 3C duties.
Course Type:
Read More
Signal Works Testing Module 3D
Provides training on how to carry out Signal Works Testing, Verification Tester duties for testing cables in the working railway environment.
Course Type:
Read More
Signal Works Testing Module 4T
Provides training on Signalling Works Testing, Module 4T Tester duties covering the requirements and processes needed to perform Signalling Works Testing Mod...
Course Type:
Read More
Telecommunications Testing and Commissioning for Cable Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Cable Systems equipment the knowledge and prac...
Course Type:
Read More
Telecommunications Testing and Commissioning for Power Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Power Systems equipment the knowledge and practical skills re...
Course Type:
Read More
Telecommunications Testing and Commissioning for Voice Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Voice Systems equipment the knowledge and practical skills re...
Course Type:
Read More
Telecoms Maintenance Testing & Fault Investigation Process
The course provides the delegates with the necessary knowledge to be competent in the use of the TMT&FIP Handbook and a comprehensive overview comprising...
Course Type:
Read More
Telecoms Optical Fibre Cables - Fault Location & Routine Ma...
By the end of this course the candidate will be able to understand the features of the different OTDR's and their operation, be able to analyse the Refra...
Course Type:
Read More
Testing & Commissioning of Transmission Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Transmission Systems equipment the knowledge and practical sk...
Course Type:
Read More
Ultra-Density Fibre Cable Jointing and Testing
This course aims to teach individuals how to strip and terminate ultra dentisty fibre cables into a fist joint, splice less joint and sheath gaps.
Course Type:
Read More
Ultrasonic - Bolthole Testing using Sperry RSU U16
Bolthole testing using Sperry RSU.
Course Type:
Read More
Ultrasonic - Rail Testing Appreciation Course for Managers
Rail testing appreciation course for managers.
Course Type:
Read More
Ultrasonic - Rail Testing Operator Course U1/U2
Rail testing operator course (U1/U2).
Course Type:
Read More
Ultrasonic - Thermit Weld Testing U6
Assessment of GCC in reduced section rail.
Course Type:
Read More
Ultrasonic Testing of Rail Operator Training - Procedures U...
The key aim of this course is to provide trainees with the underpinning knowledge and practical experience to obtain the competence certification required fo...
Course Type:
Read More
VLVT - Voltage Longitudinal Voltage Transverse Immunisation...
This course is to provide training to make sure Immunisation testing is undertaken competently on Telecom’s cable systems. The training is aimed at ...
Course Type:
Read More
Vehicle Inspection and Brake Testing
This course covers the mandatory brake testing tasks that are required to allow traction and rolling stock to travel on the infrastructure. It covers trainin...
Course Type:
Read More
City & Guild 2391-51 Level 3 Award in Period Inspection, Te...
Any delegates wishing to attend this course ideally would have completed the C&G 2382 (17th Edition) prior to July 2018 or the C&G (18th Edition) fro...
Course Type:
Read More
City & Guilds 2377 - Portable Appliance Testing
We recommend that delegates have an up to date copy of the IEE code of practice for In-service Inspection and Testing of Electrical Equipment. The followi...
Course Type:
Read More
Copper Telecoms Cable Testing
Introduction Features of telephone and other copper comms cabling and networks, network topologies • Basic Electrical Theory Voltage, current and res...
Course Type:
Read More
DC Electrified Lines Testing and Strapping - Level 'B'
Training covering duties of certified staff to test that the conductor rail is not energized and to fit short-circuiting straps (strapping).
Course Type:
Read More
Electrical Testing of Signalling Power Distribution Equipme...
This course is aimed at team leader level and above and provides the training to deliver the periodic inspection & test requirements of the maintenance w...
Course Type:
Read More
Electrical Testing of Signalling Power Distribution Equipme...
This is to supplement current holders of Plant 17 with additional IT SPS testing knowledge. This training course is aimed at existing Plant 17 holders to ...
Course Type:
Read More
Face Fit Briefing: Module 3 Face Fit Testing
Learn about the dangers associated with respiratory hazards, how to mitigate the risks by using simple steps and how to test tight fitting RPE.
Course Type:
Read More
Failure and Incident Testing (Level 1)
Understand the procedures that are for the reporting and recording of wrong side failures. Understand how to recognise the implications of the failures sympt...
Course Type:
Read More
Failure and Incident Testing (Level 2)
Which procedures give guidelines and instructions relating to the response to signalling failures.How to verify the symptoms of a failure which were apparent...
Course Type:
Read More
Installation and Testing of Semi-Automatic Track Warning Sy...
At the end of the training, delegates will be able to carry out installation faulting, testing, and preventative and corrective maintenance on the Fixed Semi...
Course Type:
Read More
Introduction to Signalling Testing Processes
This training course will provide an understanding to why testing is required and the associated risks that can be caused if not undertaken correctly. This c...
Course Type:
Read More
Liquid Penetrant Testing
To train delegates who are responsible for undertaking Liquid Penetrant Testing (LPT) training as part of their duties on Network Rail Infrastructure.
Course Type:
Read More
Liquid Penetrant Testing - Recertification
To recertificate personnel who are currently certificated in liquid penetrant inspection.
Course Type:
Read More
Magnetic Particle Testing
To train delegates who are responsible for undertaking Magnetic Particle Testing (MPT) training as part of their duties on Network Rail Infrastructure.
Course Type:
Read More
Magnetic Particle Testing - Recertification
To recertificate personnel who are currently certificated in magnetic particle testing.
Course Type:
Read More
Non-Destructive Testing Level 2 Supervisor
For individuals responsible for undertaking and supervising the ultrasonic testing of rail in track and the assessment of Level 1 qualified URFDO's.
Course Type:
Read More
Principles of Testing and Commissioning on Telecoms equipment
This course gives an overall introduction to the principles and theory of Testing and Commissioning within the Network Rail environment. The course will focu...
Course Type:
Read More
SMTH.b Aspect Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the Aspect testing defined tests covered in the Signal Maintenance testing Handbook.
Course Type:
Read More
SMTH.c Points Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the Point testing defined tests covered in the Signal Maintenance testing Handbook.
Course Type:
Read MoreSMTH.d Cable Function Testing (Upskilling)
This course delivers the knowledge and skills required to undertake the cable function testing as defined in the Signal Maintenance testing Handbook. &...
Course Type:
Read More
SPS 02.03 Periodic Electrical Testing of Signaling Power S...
This course is aimed at team leader level and above and provides the training to deliver the periodic inspection & test requirements of the maintenance w...
Course Type:
Read More
Signal Works Testing Module 2
Provides the underpinning knowledge and practical experience of the requirements and processes needed to perform Signalling Works Testing Mod 2 Principles te...
Course Type:
Read More
Signal Works Testing Module 3A
Develops understanding of the requirements and processes needed to perform Signalling Works Verification Testing.
Course Type:
Read More
Signal Works Testing Module 3BI
Provides training on carrying out Signal Works Testing, Functional Tester (Interlockings) Mod 3BI duties for the testing of interlocking type circuits in equ...
Course Type:
Read More
Signal Works Testing Module 3BL
Develops knowledge, understanding and skills of the requirements and processes needed to perform Signalling Works Functional Testing.
Course Type:
Read More
Signal Works Testing Module 3C
Provides knowledge and understanding to perform Signalling Works Verification Testing Mod 3C duties.
Course Type:
Read More
Signal Works Testing Module 3D
Provides training on how to carry out Signal Works Testing, Verification Tester duties for testing cables in the working railway environment.
Course Type:
Read More
Signal Works Testing Module 4T
Provides training on Signalling Works Testing, Module 4T Tester duties covering the requirements and processes needed to perform Signalling Works Testing Mod...
Course Type:
Read More
Telecommunications Testing and Commissioning for Cable Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Cable Systems equipment the knowledge and prac...
Course Type:
Read More
Telecommunications Testing and Commissioning for Power Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Power Systems equipment the knowledge and practical skills re...
Course Type:
Read More
Telecommunications Testing and Commissioning for Voice Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Voice Systems equipment the knowledge and practical skills re...
Course Type:
Read More
Telecoms Maintenance Testing & Fault Investigation Process
The course provides the delegates with the necessary knowledge to be competent in the use of the TMT&FIP Handbook and a comprehensive overview comprising...
Course Type:
Read More
Telecoms Optical Fibre Cables - Fault Location & Routine Ma...
By the end of this course the candidate will be able to understand the features of the different OTDR's and their operation, be able to analyse the Refra...
Course Type:
Read More
Testing & Commissioning of Transmission Systems
The purpose of this course is to give individuals carrying out the testing and commissioning of Transmission Systems equipment the knowledge and practical sk...
Course Type:
Read More
Ultra-Density Fibre Cable Jointing and Testing
This course aims to teach individuals how to strip and terminate ultra dentisty fibre cables into a fist joint, splice less joint and sheath gaps.
Course Type:
Read More
Ultrasonic - Bolthole Testing using Sperry RSU U16
Bolthole testing using Sperry RSU.
Course Type:
Read More
Ultrasonic - Rail Testing Appreciation Course for Managers
Rail testing appreciation course for managers.
Course Type:
Read More
Ultrasonic - Rail Testing Operator Course U1/U2
Rail testing operator course (U1/U2).
Course Type:
Read More
Ultrasonic - Thermit Weld Testing U6
Assessment of GCC in reduced section rail.
Course Type:
Read More
Ultrasonic Testing of Rail Operator Training - Procedures U...
The key aim of this course is to provide trainees with the underpinning knowledge and practical experience to obtain the competence certification required fo...
Course Type:
Read More
VLVT - Voltage Longitudinal Voltage Transverse Immunisation...
This course is to provide training to make sure Immunisation testing is undertaken competently on Telecom’s cable systems. The training is aimed at ...
Course Type:
Read More
Vehicle Inspection and Brake Testing
This course covers the mandatory brake testing tasks that are required to allow traction and rolling stock to travel on the infrastructure. It covers trainin...
Course Type:
Read More
