Course Name

City & Guild 2391-51 Level 3 Award in Period Inspection, Testing & Certification

Course Description

<p>Any delegates wishing to attend this course ideally would have completed the C&amp;G 2382 (17th Edition) prior to July 2018 or the C&amp;G (18th Edition) from July 2018 onwards, if not, completed any of the C&amp;G 2382 courses although, though this is not a mandatory entry requirement.</p> <p>Ideally the delegate will be electrically aware/or working in a similar environment.</p>

Audience

This course is suitable for domestic installers and electricians who wish to carry out periodic inspections and testing plus associated certification. If candidates have no previous testing experience then they are still able to take the course but are advised to attend the 6 day course that includes an extra two days training immediately before the course date. We strongly recommend that candidates have the City & Guilds 2382 prior to taking this course, though this is not a mandatory entry requirement.

Duration:

6 Day(s)

Class size:

5

Competence Name Awarded:

Competence Awarded:

Course Code:

PD/IE/C&G2395 PIT&C

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Copper Telecoms Cable Testing

Course Description

<p>Introduction<br /> Features of telephone and other copper comms cabling and networks, network topologies<br /> &bull; Basic Electrical Theory<br /> Voltage, current and resistance, SI units<br /> &bull; Signalling on Copper Comms Cables<br /> Analogue and digital, frequency and bit rate, electrical characteristics of data cables, DC loop.<br /> &bull; Testing Scenarios &amp; Configurations<br /> Commission testing, maintenance &amp; fault finding<br /> &bull; Using a Multimeter<br /> Principles of tests, power, battery, earth, short circuit, contact and disconnections tests, multimeter setup, testing sequence<br /> &bull; Using a Tone Amplifier &amp; Generator<br /> Principles of tests, setup of equipment, locating cables<br /> &bull; Using a Ohmmeter (Bridge Megger)<br /> Principles of tests, insulation resistance, loop resistance, test leads, instrument settings<br /> &bull; Using a Certification Tester<br /> Principles of tests, setup of equipment, performance standards<br /> &bull; TDR Testing<br /> Principles of TDR testing, analysis of TDR traces<br /> &bull; Analysis of Test Results<br /> Ascertain line conditions and faults from multimeter, Ohmmeter &amp; other test results<br /> &bull; Course Review<br /> &bull; Assessments<br /> Practical assessment &amp; short written tes</p>

Audience

est engineers responsible for commissioning & acceptance testing of new installations • Maintenance staff (faultsmen) responsible for locating faults • Managers and engineers who are required to accept, interpret or understand test results N.B. A basic understanding of copper cable jointing is required for this advanced course

Duration:

3 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Telecomms cable systems.Telecomms Copper Cables - Fault Location & Routine Maintenance Testing

Competence Awarded:

Tel 02.06

Course Code:

CTCT

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Electrical Testing of Signalling Power Distribution Equipment (IT systems only)

Course Description

<p>This course is aimed at team leader level and above and provides the training to deliver the periodic inspection &amp; test requirements of the maintenance work instructions specifically for Isolated Terra (IT) based systems and in accordance with NR/L2/SIGELP/50000.<br /> <br /> For TT or TN earthing systems then Plant 17 competence shall continue to be used.</p>

Audience

This course is aimed at Team Leader level. The pre-requisites for this course are: - Plant 01 at Level 3 and - successful completion of SPS 01 eLearning course For existing Plant 17 holders, a briefing is available detailing the new requirements for testing IT based systems. Existing Plant 17 holders only need the ebriefing and do not require the extra SPS 02.03 competence endorsement.

Duration:

3 Days Day(s)

Class size:

8

Competence Name Awarded:

Electrical Testing of Signalling Power Distribution Equipment (IT systems only)

Competence Awarded:

SPS 02.03

Course Code:

SPS 02.03

Prerequisite Name:

Personal Track Safety SPS 01 Electrical Safety Awareness Undertake installation, maintenance, modification and repair of L V electrical installations

Prerequisite Short Code:

PTS, SPS 01, Plant 01

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Face Fit Briefing: Module 3 Face Fit Testing

Course Description

Learn about the dangers associated with respiratory hazards, how to mitigate the risks by using simple steps and how to test tight fitting RPE.

Audience

This course is aimed at Network Rail Personnel and those who work across the rail industry: - who are responsible employees required to wear Respiratory Protective Equipment (RPE); -who will need to perform a face fit test. This module, along with the two preceding modules must be undertaken by those identified to become a Face Fit tester. Upon completion of this, a practical session must be booked and attended in order to gain the face fit tester competence. The module identifies the ways in which this must be achieved. Not for office-based staff.

Duration:

0.5 Day(s)

Class size:

1

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

FF/OHS/3

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Failure and Incident Testing (Level 2)

Course Description

<p>Which procedures give guidelines and instructions relating to the response to signalling failures.How to verify the symptoms of a failure which were apparent to the signalman, driver, technician or member of the public to assess the occurrence and operational effect. How to recognise the implications of the failure symptoms on the operational safety of the railway in determining the classification of the fault.</p>

Audience

This course is designed to train persons required to carry out initial investigation into reported signalling failures, classify the fault and diagnose it to a possible faulty system or equipment.

Duration:

2 Day(s)

Class size:

8

Competence Name Awarded:

CCS Signal Maintenance Testing SFI Level 2

Competence Awarded:

SIG MAINT TEST SFI 02

Course Code:

STF 006

Prerequisite Name:

CCS Signal Maintenance Testing SFI Level 1

Prerequisite Short Code:

SIG MAINT TEST SFI 01

Skills Assessment Scheme Regime:

T3+

Course Type:

How to Book

Course Name

Introduction to Signalling Testing Processes

Course Description

<p>This training course will provide an understanding to why testing is required and the associated risks that can be caused if not undertaken correctly. This course primarily focuses on the Clapham disaster, Dalwhinnie derailment and Waterloo incident. An over-arching training solution will ensure we don&#39;t forget the lessons of the past as this can be the cause of failures resulting in derailment or collisions.</p>

Audience

This course is aimed at anyone requiring an understanding of the testing processes. To both internal and external staff who require an understanding of why testing of signalling systems is important.

Duration:

0.25 Day(s)

Class size:

Competence Name Awarded:

Competence Awarded:

Course Code:

STF 90017.E

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Liquid Penetrant Testing - Recertification

Course Description

<p>To recertificate personnel who are currently certificated in liquid penetrant inspection.</p>

Audience

Personnel who are required to use liquid penetrant testing as part of their duties.

Duration:

0.5 days Day(s)

Class size:

4

Competence Name Awarded:

Undertake Liquid Penetrant Testing.

Competence Awarded:

NDT LPT

Course Code:

NDT LPT - R

Prerequisite Name:

Liquid Penetrant Testing (LPT)

Prerequisite Short Code:

PLT 402c. E1

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Magnetic Particle Testing - Recertification

Course Description

<p>To recertificate personnel who are currently certificated in magnetic particle testing.</p>

Audience

Personnel who are required to use magnetic particle testing as part of their duties.

Duration:

0.5 days Day(s)

Class size:

4

Competence Name Awarded:

Undertake Magnetic Particle Testing.

Competence Awarded:

NDT MPT

Course Code:

NDT MPT - R

Prerequisite Name:

Magnetic Particle Testing (MPT)

Prerequisite Short Code:

PLT 402c. E2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Principles of Testing and Commissioning on Telecoms equipment

Course Description

<p>This course gives an overall introduction to the principles and theory of Testing and Commissioning within the Network Rail environment. The course will focus on providing the necessary and common theory, principles and NR protocols that are required before trainees can move onto any other modules in this suite. Tel 600 is a pre-requisite for all modules considered in scope that follow (TEL 601&ndash;607).<br /> <br /> &nbsp;</p>

Audience

Engineers that carry out Testing and Commissioning on Telecoms equipment. NRT and Routes (Telecom) Technical Engineering roles (occupational, maintenance) + approved NR contractors.

Duration:

0.5 Day(s)

Class size:

Competence Name Awarded:

Undertake Testing and Commissioning on Telecoms Equipment

Competence Awarded:

Tel 600

Course Code:

T&CF

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

SMTH.c Points Testing (Upskilling)

Course Description

<p>This course delivers the knowledge and skills required to undertake the Point testing defined tests covered in the Signal Maintenance testing Handbook. &nbsp;</p>

Audience

Staff who will be required to undertake SMTH testing as a regular part of their work place activities

Duration:

1 Day Day(s)

Class size:

6

Competence Name Awarded:

CCS Signal Maintenance Testing Core Skills; Points Testing

Competence Awarded:

SIG MAINT TEST SMTH.c

Course Code:

STF 604

Prerequisite Name:

CCS Signal Maintenance Testing Core Skills

Prerequisite Short Code:

SIG MAINT TEST SMTH.a

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

SPS 02.03 Periodic Electrical Testing of Signaling Power Systems (IT Only)

Course Description

<p>This course is aimed at team leader level and above and provides the training to deliver the periodic inspection &amp; test requirements of the maintenance work Instructions specifically for Isolated Terra (IT) based systems and in accordance with NR/L2/SIGELP/50000.<br /> Note: For TT or TN earthing systems then Plant 17 competence shall continue to be used</p>

Audience

D&P Staff Signaling Staff

Duration:

3 Day(s)

Class size:

8

Competence Name Awarded:

Periodic Electrical Testing of Signaling Power Distribution Equipment (IT Systems Only) in accordance with NR/L2/SIGELP/50000

Competence Awarded:

SPS 02.03

Course Code:

SPS 02.03

Prerequisite Name:

Undertake installation, maintenance, modification and repair of L V electrical installations SPS 01 Electrical Safety Awareness Preventative and Corrective Maintenance of Signaling Power Distribution Equipment above 175 V

Prerequisite Short Code:

Plant 01; SPS 01; SPS 02.01

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Signal Works Testing Module 3A

Course Description

<p>Develops understanding of the requirements and processes needed to perform Signalling Works Verification Testing.</p>

Audience

Anyone responsible for the Signalling Works Verification Testing with a comprehensive understanding of wiring diagrams and able to use electrical measuring devices.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

STF 252

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Signal Works Testing Module 3BL

Course Description

<p>Develops knowledge, understanding and skills of the requirements and processes needed to perform Signalling Works Functional Testing.</p>

Audience

Anyone responsible for carrying out Signal Works Testing, Functional Tester (Interlockings) Mod 3BL duties for the testing of interlocking type circuits in equipment rooms who already has a Verification Tester Mod 3C competence.

Duration:

6 Day(s)

Class size:

6

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

STF 254

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Signal Works Testing Module 3D

Course Description

<p>Provides training on how to carry out Signal Works Testing, Verification Tester duties for testing cables in the working railway environment.</p>

Audience

Anyone responsible for the processes needed to perform Signalling Works Verification Cable Testing who has a comprehensive understanding of wiring diagrams and able to use electrical measuring devices.

Duration:

2 Day(s)

Class size:

6

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

STF 256

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Telecommunications Testing and Commissioning for Cable Systems

Course Description

<p>The purpose of this course is to give&nbsp;individuals carrying out the testing and&nbsp;commissioning of Cable Systems&nbsp;equipment the knowledge and practical&nbsp;skills required to safely carry out the role,&nbsp;which can be reliably tested and evidenced&nbsp;as necessary.</p>

Audience

NRT and Routes (Telecoms) Technical Engineering roles (occupational, maintenance) Approved NR contractors.

Duration:

2 hours Day(s)

Class size:

Competence Name Awarded:

Undertake Testing & Commissioning on Telecommunication Equipment - Cable Systems

Competence Awarded:

TEL 603

Course Code:

T&CCS

Prerequisite Name:

Undertake Testing and Commissioning on Telecoms Equipment.

Prerequisite Short Code:

Tel 600

Skills Assessment Scheme Regime:

5

Course Type:

Enroll Now

Course Name

Telecoms Maintenance Testing & Fault Investigation Process

Course Description

<p>The course provides the delegates with the necessary knowledge to be competent in the use of the TMT&amp;FIP Handbook and a comprehensive overview comprising of theoretical sessions, practical exercises, syndicate work and assessments.</p>

Audience

For technician, engineers and managers who need to be competent in the use of TMT&FIP. It is a requirement to have attended this course before an individual can hold the TMT&FIP competency.

Duration:

2 Day(s)

Class size:

12

Competence Name Awarded:

Undertake initial diagnosis of Telecoms failures to determine the necessary course of action; Manage the Progression of Work and Resources During Telecomms Testing, Maintenance or Installation

Competence Awarded:

Tel 10; Tel 09

Course Code:

TMT-FIP

Prerequisite Name:

Any TEL competence

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Testing & Commissioning of Transmission Systems

Course Description

<p>The purpose of this course is to give individuals carrying out the testing and commissioning of Transmission Systems equipment the knowledge and practical skills required to safely carry out the role, which can be reliably tested and evidenced as necessary.</p>

Audience

Telecoms Technical Engineering roles (occupational, maintenance) Approved NR contractors.

Duration:

0.25 Day(s)

Class size:

Competence Name Awarded:

Undertake Testing & Commissioning on Telecommunication Equipment - Transmission Systems

Competence Awarded:

TEL 601

Course Code:

T&CTS

Prerequisite Name:

Undertake Testing and Commissioning on Telecoms Equipment

Prerequisite Short Code:

TEL 600

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Ultrasonic - Bolthole Testing using Sperry RSU U16

Course Description

<p>Bolthole testing using Sperry RSU.</p>

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U16 - Testing of fishplated rail joints and holes using the Sperry RSU RTS.

Competence Awarded:

NDT U16

Course Code:

NDT U16

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U15; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Rail Testing Operator Course U1/U2

Course Description

<p>Rail testing operator course (U1/U2).</p>

Audience

Staff required to carry out ultrasonic testing of track.

Duration:

10 Day(s)

Class size:

8

Competence Name Awarded:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Competence Awarded:

NDT U1; NDT U2

Course Code:

NDT U1/2

Prerequisite Name:

Personal Track Safety. Ultrasonic Inspection U5 - Examination of squats and inspection of rail head repairs. Ultrasonic Inspection U7 - Rail measurement. Ultrasonic Inspection U8 - Confirmation and examination of vertical longitudinal defects. Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS.

Prerequisite Short Code:

PTS, NDT U5, NDT U7, NDT U8, NDT U15

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic Testing of Rail Operator Training - Procedures U15 & U8

Course Description

The key aim of this course is to provide trainees with the underpinning knowledge and practical experience to obtain the competence certification required for the safe and effective operation of procedures U15 and U8 for the ultrasonic testing of rail.

Audience

This course is designed to train persons who are responsible for undertaking the ultrasonic testing of rail in track where they are required to carry out ultrasonic testing of rail using procedures U15 and U8 in their daily work.

Duration:

5 Day(s)

Class size:

8

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

NDT U15 & U8

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Vehicle Inspection and Brake Testing

Course Description

<p>This course covers the mandatory brake testing tasks that are required to allow traction and rolling stock to travel on the infrastructure. It covers training on wheelsets, pneumatic brakes, vehicle inspection and mandatory brake inspections.</p> <p>This course is suitable for those who have been apprentice-trained or have relevant fitter qualifications, have a knowledge of wheelset examinations and a knowledge of brake examinations</p>

Audience

Fleet & Engineering Maintainers for BCS, TRS, OTM, OLET within NR only

Duration:

10 Days Day(s)

Class size:

6

Competence Name Awarded:

Undertake Maintenance of Brake Systems

Competence Awarded:

RVM 16

Course Code:

VIBT

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book