Network Rail Workforce Development

Course Name

4 Clamps with 1200mm fishplates (up to 80mph)

Course Description

This course will enable delegates to have an appreciation of the planning process undertaken when identifying the location of a temporary rail joint, and to be able to understand their role in the planning, installation and removal of a temporary rail joint up to 80mph using the 4 Clamps with 1200mm fishplates installation method.

Audience

This course is intended for those who need to install, check and remove temporary rail joints on the infrastructure for higher speeds. This is a practical course and will award a competence if successfully completed.

Duration:

1 Day Day(s)

Class size:

6

Course Name

4 Clamps with 1200mm fishplates (up to 80mph)

Course Description

This course will enable delegates to have an appreciation of the planning process undertaken when identifying the location of a temporary rail joint, and to be able to understand their role in the planning, installation and removal of a temporary rail joint up to 80mph using the 4 Clamps with 1200mm fishplates installation method.

Audience

This course is intended for those who need to install, check and remove temporary rail joints on the infrastructure for higher speeds. This is a practical course and will award a competence if successfully completed.

Duration:

1 Day Day(s)

Class size:

6

Competence Name Awarded:

The installation, maintenance, removal and inspection of temporary clamped rail joints of the track systems up to 50 mph.4 Clamps with 1200mm fishplates

Competence Awarded:

TR 52.01

Course Code:

TR52.01

Prerequisite Name:

The installation, maintenance, removal and inspection of temporary clamped rail joints of the track systems up to 50 mph

Prerequisite Short Code:

TR 52

Skills Assessment Scheme Regime:

4

Course Type:

Audience

TME, ATME and SM(T), STO(T) and Section Supervisor (T) where these individuals are analysing mechanised track inspection data, Individuals identified as part of succession planning to these roles.

Duration:

2 Day(s)

Class size:

10

Competence Name Awarded:

N/A

10

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK801A

Prerequisite Name:

Competence Name Awarded:

Boundary Measure Inspection

Competence Awarded:

TR 51

Course Code:

TR 51

Prerequisite Name:

Personal Track Safety

Prerequisite Short Code:

PTS

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Commissioning, use and approval of surveys and maintenance designs

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called 'Commissioning, use and approval of surveys and maintenance designs prequalifier'. This will take approximately 3 hours to complete and the PDF can be downloaded if required. Delegates must pass the assessment at the end of this prequalifier before they can enrol in the 'Commissioning, use and approval of surveys and maintenance designs' face-to-face training event. The two-part event is designed to develop delegates who are responsible for commissioning, use and approval of surveys and maintenance designs as part of their duties on Network Rail Infrastructure.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress into the role of TME, ATME, SM (T), SAE, PTO and RME. Delegates who wish to attend should possess either Basic surveying, Basic track design, Hallade design OR a TME should provide evidence of managing at least two surveys, one alignment design and one level design in the last 5 years.

Duration:

1.5 Day(s)

Class size:

10

Course Name

Commissioning, use and approval of surveys and maintenance designs

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called 'Commissioning, use and approval of surveys and maintenance designs prequalifier'. This will take approximately 3 hours to complete and the PDF can be downloaded if required. Delegates must pass the assessment at the end of this prequalifier before they can enrol in the 'Commissioning, use and approval of surveys and maintenance designs' face-to-face training event. The two-part event is designed to develop delegates who are responsible for commissioning, use and approval of surveys and maintenance designs as part of their duties on Network Rail Infrastructure.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress into the role of TME, ATME, SM (T), SAE, PTO and RME. Delegates who wish to attend should possess either Basic surveying, Basic track design, Hallade design OR a TME should provide evidence of managing at least two surveys, one alignment design and one level design in the last 5 years.

Duration:

1.5 Day(s)

Class size:

10

Competence Name Awarded:

Commissioning, use and approval of surveys and maintenance designs

Competence Awarded:

TR17

Course Code:

TRK 17

Prerequisite Name:

Personal Track Safety, Level 3; Individual Working Alone, Level 3; Controller of Site Safety, Level 3

Prerequisite Short Code:

PTS; IWA; COSS

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Commissioning, use and approval of surveys and maintenance designs prequalifier

Course Description

A pre-requisite of attending the face 2 face course (Commissioning, use and approval of surveys and maintenance designs course) is this Pre course learning. This is in the form of the Commissioning, use and approval of surveys and maintenance designs interactive PDF and summative knowledge check, will be carried out, passed and recorded BEFORE the commencement of the course. On completion of the interactive PDF the delegates will be able to: What are the fundamental principles of survey and maintenance design required? What are the capabilities and limitations of on-track machine (OTM) particularly:

Plain line stone-blowers (PLSB)
Multipurpose stone-blowers (MPSB)
Plain line tampers (PLT)
S and C tampers (SCT)

Audience

Pre-course learning before attending the face 2 face course - Commissioning, use and approval of surveys and maintenance designs course.

Duration:

Day(s)

Class size:

1

Course Name

Commissioning, use and approval of surveys and maintenance designs prequalifier

Course Description

A pre-requisite of attending the face 2 face course (Commissioning, use and approval of surveys and maintenance designs course) is this Pre course learning. This is in the form of the Commissioning, use and approval of surveys and maintenance designs interactive PDF and summative knowledge check, will be carried out, passed and recorded BEFORE the commencement of the course. On completion of the interactive PDF the delegates will be able to: What are the fundamental principles of survey and maintenance design required? What are the capabilities and limitations of on-track machine (OTM) particularly:

Plain line stone-blowers (PLSB)
Multipurpose stone-blowers (MPSB)
Plain line tampers (PLT)
S and C tampers (SCT)

Skills Assessment Scheme Regime:

Course Type:

Enrol

Course Name

Establish the Inspection and Maintenance Requirements for Longitudinal Bearer Systems

Course Description

Enable individuals to correctly specify and create inspection and maintenance plans for longitudinal bearers in order that the performance of the track asset is maintained. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. One day Trainer led classroom-based training event with an open book consolidation exercise. This Training Solution can be delivered in a virtual classroom.

Audience

TME ATME SAE AE

Duration:

1 Day Day(s)

Class size:

12

Course Name

Establish the Inspection and Maintenance Requirements for Longitudinal Bearer Systems

Course Description

Enable individuals to correctly specify and create inspection and maintenance plans for longitudinal bearers in order that the performance of the track asset is maintained. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. One day Trainer led classroom-based training event with an open book consolidation exercise. This Training Solution can be delivered in a virtual classroom.

Audience

TME ATME SAE AE

Duration:

1 Day Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK616/710A

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Felix Operator eLearning

Course Description

This is a blended course comprised of an E-Learning and 3 day F2F module. The E-learning forms the pre-learning learners will need to complete before undertaking the F2F module.

The course covers the use of Felix, setup, maintenance and disassembly of the machine.

Audience

Track Engineering staff who will be using and operating the Felix machine as part of their duties to undertake 053 inspections,

Duration:

3 Day(s)

Class size:

Course Name

Felix Operator eLearning

Course Description

This is a blended course comprised of an E-Learning and 3 day F2F module. The E-learning forms the pre-learning learners will need to complete before undertaking the F2F module.

The course covers the use of Felix, setup, maintenance and disassembly of the machine.

Audience

Track Engineering staff who will be using and operating the Felix machine as part of their duties to undertake 053 inspections,

Duration:

3 Day(s)

Class size:

Competence Name Awarded:

Competence Awarded:

Course Code:

Tr14 E

Prerequisite Name:

Establish the operational condition of the Permanent Way by Detailed Inspection.053 Inspection

Prerequisite Short Code:

Tr 07.01

Interim Manual Rail Grinding of Plain Line, S & C - External 1-day Assessment

Competence Awarded:

Tr80b

Course Code:

Tr80b

Prerequisite Name:

Undertake Liquid Penetrant Testing, Undertake Magnetic Particle Testing, PUWER

Prerequisite Short Code:

NDT LPT, NDT MPT, NCB - GEN29

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Interim Manual Rail Grinding of Plain Line, S&C - Refresh Training & Assessment

Course Description

It is acknowledged that there are a number of Grinding Operatives in the Supply Chain who have long experience and good level of knowledge and skills.
For those colleagues, attending a full 10-days course will not be productive or cost-effective, and may also create backlogs with planned grinding work on Network Rail track infrastructure.
This externally-delivered refresher training and assessment awards TR80 competency to colleagues with a minimum of 6 months experience. The total duration of this externally delivered refresher and assessment event is 5 days, with the contents based on the approved 10-day Neway Grinding Course covering Plain Line and S&C modules.

Audience

• Grinding Team Leaders • Grinding Technicians • Grinding Operatives

Duration:

5 Days Day(s)

Class size:

6

Course Name

Interim Manual Rail Grinding of Plain Line, S&C - Refresh Training & Assessment

Course Description

It is acknowledged that there are a number of Grinding Operatives in the Supply Chain who have long experience and good level of knowledge and skills.
For those colleagues, attending a full 10-days course will not be productive or cost-effective, and may also create backlogs with planned grinding work on Network Rail track infrastructure.
This externally-delivered refresher training and assessment awards TR80 competency to colleagues with a minimum of 6 months experience. The total duration of this externally delivered refresher and assessment event is 5 days, with the contents based on the approved 10-day Neway Grinding Course covering Plain Line and S&C modules.

Audience

• Grinding Team Leaders • Grinding Technicians • Grinding Operatives

Duration:

5 Days Day(s)

Class size:

6

Competence Name Awarded:

Interim Manual Rail Grinding of Plain Line, S&C-Refresh Training & Assessment

Competence Awarded:

Tr80c

Course Code:

Tr80c

Prerequisite Name:

Personal Track Safety (PTS), Undertake Liquid Penetrant Testing, Undertake Magnetic Particle Testing, PUWER

Prerequisite Short Code:

PTS, NDT LPT, NDT MPT, NCB - GEN29

Enable the Track Section Managers and Track Section Supervisors to undertake the management of S&C inspections, in compliance with Network Rail standards and safety requirements. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. Blended training solution involving several pre-learning presentations, managed in NR Learn, and a face-to-face or virtual classroom event lasting 4 days. A summative assessment is provided on day 4 to test the delegates thought processes in different scenarios.

Audience

Core audience: • Track Section Managers • Track Section Supervisors • Existing 053 and 054 inspectors aspiring to managerial roles Additional audience: • Track Maintenance Engineers • Assistant Track Maintenance Engineers • Rail Management Engineers • Section Managers [Welding and Grinding] • Section Supervisors [Welding and Grinding]

Duration:

4 Days Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK606/607B

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Manage 053 and 054 Inspections (Pre-Learning)

Course Description

This is the pre-learning for the face-to-face Manage 053 and 054 Inspections course. Enable staff to undertake the management of S&C inspections, in compliance with Network Rail standards and safety requirements. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. Blended training solution involving several pre-learning presentations, managed in NR Learn, and a face-to-face or virtual classroom event lasting 4 days. A summative assessment is provided on day 4 to test the delegates thought processes in different scenarios.

Audience

Core audience: • Track Section Managers • Track Section Supervisors • Existing 053 and 054 inspectors aspiring to managerial roles Additional audience: • Track Maintenance Engineers • Assistant Track Maintenance Engineers • Rail Management Engineers • Section Managers [Welding and Grinding] • Section Supervisors [Welding and Grinding]

Duration:

4 Hours Day(s)

Class size:

9999

Course Name

Manage 053 and 054 Inspections (Pre-Learning)

Course Description

This is the pre-learning for the face-to-face Manage 053 and 054 Inspections course. Enable staff to undertake the management of S&C inspections, in compliance with Network Rail standards and safety requirements. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. Blended training solution involving several pre-learning presentations, managed in NR Learn, and a face-to-face or virtual classroom event lasting 4 days. A summative assessment is provided on day 4 to test the delegates thought processes in different scenarios.

Audience

Core audience: • Track Section Managers • Track Section Supervisors • Existing 053 and 054 inspectors aspiring to managerial roles Additional audience: • Track Maintenance Engineers • Assistant Track Maintenance Engineers • Rail Management Engineers • Section Managers [Welding and Grinding] • Section Supervisors [Welding and Grinding]

Duration:

4 Hours Day(s)

Class size:

9999

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK606/607B(P)

Prerequisite Name:

Audience

This pre-course interactive PDF and knowledge check focuses on tactical management but is also aimed at delegates who aim to progress into the role of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

3 hours Day(s)

Class size:

Course Name

Manage predictive and preventative track maintenance prequalifier

Course Description

This pre-course interactive PDF and knowledge check are designed to develop delegates who are responsible for management of predictive and preventative track maintenance as part of their duties on Network Rail Infrastructure. It is the first module of the learning for the manage predictive and preventative track maintenance course and needs to be completed and passed before attending the course. Delegates must achieve 80% of the pre course knowledge check to attend the course and delegates will have two opportunities to pass. Failure on the second attempt will mean, they cannot attend the module and require more action learning for a time period no shorter than 3 months. A development plan should be utilised, to seek to develop their knowledge and skills in relation to Manage predictive and preventative track maintenance

Audience

This pre-course interactive PDF and knowledge check focuses on tactical management but is also aimed at delegates who aim to progress into the role of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

3 hours Day(s)

1 Day Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK616/710B

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Manage the Inspection and Maintenance Requirements for Longitudinal Bearer Systems

Course Description

Enable the Track Section Managers to undertake the management of inspections and maintenance requirements for longitudinal bearers, in compliance with Network Rail standards and safety requirements. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. One day Trainer led training event with consolidation exercise. This Training Solution can be delivered in a virtual classroom.

Audience

Section Manager[T] Section Supervisor[T] ATME Principal Technical Officer [T]

Duration:

1 Day Day(s)

Class size:

12

Course Name

Manage the Inspection and Maintenance Requirements for Longitudinal Bearer Systems

Course Description

Enable the Track Section Managers to undertake the management of inspections and maintenance requirements for longitudinal bearers, in compliance with Network Rail standards and safety requirements. Develops the knowledge and skills required to develop staff behaviours to improve the safety and performance of the asset through inspection and work definition. One day Trainer led training event with consolidation exercise. This Training Solution can be delivered in a virtual classroom.

Audience

Section Manager[T] Section Supervisor[T] ATME Principal Technical Officer [T]

Duration:

1 Day Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK616/710B

Prerequisite Name:

Course Type:

How to Book

Course Name

Management of track maintenance delivery prequalifier

Course Description

The Pre-course interactive PDF and knowledge check are the first module for the management of track maintenance delivery course. All delegates must achieve 80% of the pre course knowledge check to attend the course and delegates will have two opportunities to pass. Failure on the second attempt will mean, they cannot attend the module and require more action learning for a time period no shorter than 3 months. A development plan should be utilised, to seek to develop their knowledge and skills in relation to Management of track maintenance delivery.

Audience

This Pre-course Interactive PDF and Knowledge check focuses on tactical management but is also aimed at delegates who aim to progress into the role of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

3 hours Day(s)

Class size:

Course Name

Management of track maintenance delivery prequalifier

Course Description

The Pre-course interactive PDF and knowledge check are the first module for the management of track maintenance delivery course. All delegates must achieve 80% of the pre course knowledge check to attend the course and delegates will have two opportunities to pass. Failure on the second attempt will mean, they cannot attend the module and require more action learning for a time period no shorter than 3 months. A development plan should be utilised, to seek to develop their knowledge and skills in relation to Management of track maintenance delivery.

Audience

This Pre-course Interactive PDF and Knowledge check focuses on tactical management but is also aimed at delegates who aim to progress into the role of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

3 hours Day(s)

Class size:

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

TRK 48P

Prerequisite Name:

Pre-learning - Assure the Lateral Stability of Track

Course Description

These are the pre-learning activities on Moodle related to the course Assure the Lateral Stability of Track. Delegates must complete these activities prior to attending the face to face element of the course.

Audience

• TME • ATME • Individuals identified as part of succession planning to these roles

Duration:

3 Days Day(s)

Class size:

Competence Name Awarded:

Competence Awarded:

Course Code:

TRK801AP

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Processing, reviewing and distribution of PLPR Inspection data

Course Description

This module will enable delegates to: - Operate the PLPR system - Process and implement data review to deliver Tier 1 inspection of plain line track using the PLPR system - Identify and manage PLPR system faults. - The track inspection requirements as defined by Network Rail Company Specification NR/L2/TRK/001and NR/L3/TRK/1015, which defines the requirements of Basic Visual Track Inspection of plain line track - The inspection methods and techniques used to complete inspections including visual and physical checks in plain line track - The types of defect that may be encountered in plain line track and explain how to identify any defects or variations. - The acceptable limits of each type of defect or variation and the action that shall be taken when un-acceptable limits are reached in plain line track - How different environmental and operating conditions may affect the Inspection

Audience

This course is designed to train persons who are responsible for processing, reviewing and distributing PLPR inspection data.

Duration:

4 Day(s)

Class size:

10

Course Name

Processing, reviewing and distribution of PLPR Inspection data

Course Description

This module will enable delegates to: - Operate the PLPR system - Process and implement data review to deliver Tier 1 inspection of plain line track using the PLPR system - Identify and manage PLPR system faults. - The track inspection requirements as defined by Network Rail Company Specification NR/L2/TRK/001and NR/L3/TRK/1015, which defines the requirements of Basic Visual Track Inspection of plain line track - The inspection methods and techniques used to complete inspections including visual and physical checks in plain line track - The types of defect that may be encountered in plain line track and explain how to identify any defects or variations. - The acceptable limits of each type of defect or variation and the action that shall be taken when un-acceptable limits are reached in plain line track - How different environmental and operating conditions may affect the Inspection

Audience

This course is designed to train persons who are responsible for processing, reviewing and distributing PLPR inspection data.

Duration:

4 Day(s)

Class size:

10

Competence Name Awarded:

Process, review and distribute PLPR inspection data.

Competence Awarded:

Tr 47

Course Code:

Tr 47

Prerequisite Name:

Track Induction; Maintain permanent way assets.Plain Line These prerequisites are desirable, but not mandatory

Prerequisite Short Code:

Tr 00; Tr 01.01

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Radar Gun Operator

Course Description

The aim of this module is to provide delegates with the skills and underpinning knowledge required to undertake Radar Gun Operator duties in line with the associated capability.

Audience

For individuals nominated to prepare, operate and conduct basic maintenance of the Railmaster Radar Gun.

Duration:

0.5 Day(s)

Class size:

10

Course Name

Radar Gun Operator

Course Description

The aim of this module is to provide delegates with the skills and underpinning knowledge required to undertake Radar Gun Operator duties in line with the associated capability.

Audience

For individuals nominated to prepare, operate and conduct basic maintenance of the Railmaster Radar Gun.

Duration:

0.5 Day(s)

Class size:

10

Competence Name Awarded:

Radar Gun Operator

Competence Awarded:

TR 43

Course Code:

TR 43

Prerequisite Name:

Personal Track Safety Individual Working Alone Controller of Site Safety

Prerequisite Short Code:

PTS, IWA, COSS

Skills Assessment Scheme Regime:

6

Course Type:

How to Book

Course Name

Rail Defect Examiner

Course Description

At the end of the training the delegate will be able to: - Comply with Safety Regulations Identify the types of broken rail that can be temporarily operated under restrictions - Identify the requirements for dealing with broken and damaged rails - State the correct documentation to identify tolerances for rail breaks and damage - Extract correct data from documentation to mitigate rail breaks/damage or block the line - Ensure that clamping and bridging equipment has been fitted to standard.

Audience

Delegates must be a minimum age of 18. Meet the medical requirements of Network Rail Standard NR/L2/OHS/00124 Medical Fitness Level 1. Have a good level of literacy to meet Entry Qualifications. Meet the requirements of Network Rail Standard NR/L1/OHS/051 (Drugs and Alcohol).

Duration:

1 Day(s)

Class size:

10

Course Name

Rail Defect Examiner

Course Description

At the end of the training the delegate will be able to: - Comply with Safety Regulations Identify the types of broken rail that can be temporarily operated under restrictions - Identify the requirements for dealing with broken and damaged rails - State the correct documentation to identify tolerances for rail breaks and damage - Extract correct data from documentation to mitigate rail breaks/damage or block the line - Ensure that clamping and bridging equipment has been fitted to standard.

Audience

Delegates must be a minimum age of 18. Meet the medical requirements of Network Rail Standard NR/L2/OHS/00124 Medical Fitness Level 1. Have a good level of literacy to meet Entry Qualifications. Meet the requirements of Network Rail Standard NR/L1/OHS/051 (Drugs and Alcohol).

Duration:

1 Day(s)

Class size:

10

Competence Name Awarded:

Rail Defect Examiner

Competence Awarded:

RDE

Course Code:

Track 16

Prerequisite Name:

Maintain Permanent Way Assets; Personal Track Safety or Individual Working Alone or Controller of Site Safety

Prerequisite Short Code:

Tr 01, PTS or IWA or COSS

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Rail Defect Nominee

Course Description

This module is designed to train persons who are responsible for undertaking Rail Defect Nominee as part of their duties on Network Rail infrastructure. It is designed to develop a persons knowledge, understanding and skills. An RDN will normally be someone without track engineering knowledge but who may, in the course of their own activities be called upon to act on the discovery of a broken or defective rail.

Audience

Any person responsible for undertaking Rail Defect Nominee as part of their duties on Network Rail Infrastructure.

Duration:

1 Day(s)

Class size:

10

Course Name

Rail Defect Nominee

Course Description

This module is designed to train persons who are responsible for undertaking Rail Defect Nominee as part of their duties on Network Rail infrastructure. It is designed to develop a persons knowledge, understanding and skills. An RDN will normally be someone without track engineering knowledge but who may, in the course of their own activities be called upon to act on the discovery of a broken or defective rail.

Audience

Any person responsible for undertaking Rail Defect Nominee as part of their duties on Network Rail Infrastructure.

Duration:

1 Day(s)

Class size:

10

Competence Name Awarded:

Rail Defect Nominee

Competence Awarded:

RDN

Course Code:

RDN

Prerequisite Name:

Personal Track Safety

Prerequisite Short Code:

PTS

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Rail Friction Management

Course Description

To give delegates the underpinning knowledge required to undertake the duties associated with passing trains over broken and damaged rails and to carry out the correct procedure in a safe and efficient manner. To provide the underpinning knowledge and practical experience in the installation, inspection, filling and maintenance of track lubricators, top of rail friction modifiers and traction gel applicators.

Audience

This module is designed to train persons who are responsible for trackside rail lubricators, top of rail friction modifiers and traction gel applicators when used on Network Rail managed infrastructure.

Duration:

5 Day(s)

Class size:

8

Course Name

Rail Friction Management

Course Description

To give delegates the underpinning knowledge required to undertake the duties associated with passing trains over broken and damaged rails and to carry out the correct procedure in a safe and efficient manner. To provide the underpinning knowledge and practical experience in the installation, inspection, filling and maintenance of track lubricators, top of rail friction modifiers and traction gel applicators.

Audience

This module is designed to train persons who are responsible for trackside rail lubricators, top of rail friction modifiers and traction gel applicators when used on Network Rail managed infrastructure.

Duration:

5 Day(s)

Class size:

8

Competence Name Awarded:

Undertake routine maintenance of rail lubricator and friction modifier systems.

Competence Awarded:

Tr 31

Course Code:

TTF 31

Prerequisite Name:

Personal Track Safety

Prerequisite Short Code:

PTS

Skills Assessment Scheme Regime:

5

Course Type:

How to Book

Course Name

Raising and Removing Speed Restrictions

Course Description

At the end of the training the delegate will be able to: Comply with Safety Regulations Analyse site specific data Confirm track meets the operational requirement Identify required remedial works Raise, remove or retain ESR/TSR Record data.

Audience

Must be a minimum age of 18. Must meet the medical requirements of Network Rail Standard NR/L2/OHS/00124 Medical Fitness Level 1. Must have a good level of literacy to meet Entry Qualifications. Must meet the requirements of Network Rail Standard NR/L1/OHS/051

Duration:

3 Day(s)

Class size:

10

Course Name

Raising and Removing Speed Restrictions

Course Description

At the end of the training the delegate will be able to: Comply with Safety Regulations Analyse site specific data Confirm track meets the operational requirement Identify required remedial works Raise, remove or retain ESR/TSR Record data.

Audience

Must be a minimum age of 18. Must meet the medical requirements of Network Rail Standard NR/L2/OHS/00124 Medical Fitness Level 1. Must have a good level of literacy to meet Entry Qualifications. Must meet the requirements of Network Rail Standard NR/L1/OHS/051

Duration:

3 Day(s)

Class size:

10

Competence Name Awarded:

Confirm the track is fit for operational purposes following heavy maintenance; Confirm the track is fit for operational purposes following heavy maintenance.Raising and removal any TSR for speeds up to 60 mph.

Competence Awarded:

Tr 12; Tr 12.01

Course Code:

Track 12

Prerequisite Name:

Restore track geometry by Manual Repair; Confirm the track is fit for operational purposes following maintenance repair.

Prerequisite Short Code:

Tr 04; Tr 11

Skills Assessment Scheme Regime:

3

Course Type:

How to Book

Course Name

RFM Traction Gel Applicators

Course Description

To provide the underpinning knowledge and practical experience in the installation, inspection, filling and maintenance traction gel applicators.

Audience

This module is designed to train persons who are responsible for undertaking track maintenance or renewals where they are required to operate Traction Gel Applicators in their daily work.

Duration:

1 Day(s)

Class size:

6

Course Name

RFM Traction Gel Applicators

Course Description

To provide the underpinning knowledge and practical experience in the installation, inspection, filling and maintenance traction gel applicators.

Audience

This module is designed to train persons who are responsible for undertaking track maintenance or renewals where they are required to operate Traction Gel Applicators in their daily work.

Duration:

1 Day(s)

Class size:

6

Competence Name Awarded:

Inspect and Maintain Traction Gel Applicators.

Competence Awarded:

Tr 30

Course Code:

TTF 30

Prerequisite Name:

Track Induction.

Prerequisite Short Code:

Tr 00

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Scoping and Verification of Hand-Grinding Activities

Course Description

At the end of the training the delegate will be able to: - Correctly identify and size rail defects including those that result in derailment; - Correctly apply track gauges to identify S&C derailment hazards and appropriate grinding repair activities; - Produce a site specific Grinding plan; - Identify and comply with relevant Company Standards; - Conduct quality assurance of the Grinding activity undertaken including recording and communicating the outcomes; - Identify and communicate post Grinding actions as required.

Audience

This module is designed to train persons who are responsible for undertaking Scoping and Verification of Hand Grinding Activities training as part of their duties on Network Rail Infrastructure. It is designed to develop a person’s knowledge, understanding and skills and is therefore particularly suited to persons required to prove their competence in these areas.

Duration:

4 Day(s)

Class size:

6

Course Name

Scoping and Verification of Hand-Grinding Activities

Course Description

At the end of the training the delegate will be able to: - Correctly identify and size rail defects including those that result in derailment; - Correctly apply track gauges to identify S&C derailment hazards and appropriate grinding repair activities; - Produce a site specific Grinding plan; - Identify and comply with relevant Company Standards; - Conduct quality assurance of the Grinding activity undertaken including recording and communicating the outcomes; - Identify and communicate post Grinding actions as required.

Audience

This module is designed to train persons who are responsible for undertaking Scoping and Verification of Hand Grinding Activities training as part of their duties on Network Rail Infrastructure. It is designed to develop a person’s knowledge, understanding and skills and is therefore particularly suited to persons required to prove their competence in these areas.

Duration:

4 Day(s)

Class size:

6

Competence Name Awarded:

Scoping and specifying hand grinding activities and verifying compliance.

Competence Awarded:

Tr 26

Course Code:

TTF 26

Prerequisite Name:

Personal Track Safety; Controller of Site Safety or Individual Working Alone; Undertake Liquid Penetrant Testing; Undertake Magnetic Particle Testing; Hand Grinding of Railhead Defects.

Prerequisite Short Code:

PTS; COSS or IWA; NDT LPT; NDT MPT; Tr 25.

Skills Assessment Scheme Regime:

3

Course Type:

How to Book

Course Name

Specification and Planning of S&C Refurbishment

Course Description

Network Rails Track Asset Policy for CP5 and for future control periods highlights the importance of extending the lifecycle of an existing asset through refurbishment rather than costly renewal interventions. The course has been designed for participants to successfully specify and manage medium and heavy refurbishments in line with the policy.

Audience

Senior Asset Engineers (SAE), Works Delivery Managers (WDM), Scheme Project Managers, Supervisors, Team Leaders.

Duration:

2 Day(s)

Class size:

8

Course Name

Specification and Planning of S&C Refurbishment

Course Description

Network Rails Track Asset Policy for CP5 and for future control periods highlights the importance of extending the lifecycle of an existing asset through refurbishment rather than costly renewal interventions. The course has been designed for participants to successfully specify and manage medium and heavy refurbishments in line with the policy.

Audience

Senior Asset Engineers (SAE), Works Delivery Managers (WDM), Scheme Project Managers, Supervisors, Team Leaders.

Duration:

2 Day(s)

Class size:

8

Competence Name Awarded:

S&C Medium Refurbishment Briefing.

Competence Awarded:

TR 705b

Course Code:

TR 705b

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Specify and manage seasonal preparedness

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called ‘Specify and manage seasonal preparedness prequalifier’. This will take approximately 3 hours to complete and the PDF can be downloaded if required. Delegates must pass the assessment at the end of this prequalifier before they can enrol in the ‘Specify and manage seasonal preparedness’ face-to-face training event. The two-part event is designed to develop delegates who are responsible for specifying and managing seasonal preparedness as part of their duties on Network Rail Infrastructure.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress into the role of TME, ATME, SM (T), SAE, PTO and RME. Delegates should possess either the 610D knowledge OR be a TME who has been in post for 12 months.

Duration:

1.5 Day(s)

Class size:

10

Course Name

Specify and manage seasonal preparedness

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called ‘Specify and manage seasonal preparedness prequalifier’. This will take approximately 3 hours to complete and the PDF can be downloaded if required. Delegates must pass the assessment at the end of this prequalifier before they can enrol in the ‘Specify and manage seasonal preparedness’ face-to-face training event. The two-part event is designed to develop delegates who are responsible for specifying and managing seasonal preparedness as part of their duties on Network Rail Infrastructure.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress into the role of TME, ATME, SM (T), SAE, PTO and RME. Delegates should possess either the 610D knowledge OR be a TME who has been in post for 12 months.

Duration:

1.5 Day(s)

Class size:

10

Competence Name Awarded:

Specify and manage seasonal preparedness

Competence Awarded:

TR18

Course Code:

TRK 18

Prerequisite Name:

Personal Track Safety, Level 3; Individual Working Alone, Level 3; Controller of Site Safety, Level 3

Prerequisite Short Code:

PTS; IWA; COSS

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Stage 1 Applied Electrical - Electronics

Course Description

This training is essential for all F&E Maintainers, a three-day foundation course, it is aimed at Mechanical/Hydraulic related staff who have no prior knowledge of Electrics/Electronics.
It is not specific to any routes or regions, nor as a result of an incident, it will however be used in safety critical maintenance of our Traction and Rolling Stock Plant.

Audience

Mechanical/Hydraulic related staff who have no prior knowledge of Electrics/Electronics.

Duration:

3 Days Day(s)

Class size:

Course Name

Stage 1 Applied Electrical - Electronics

Course Description

This training is essential for all F&E Maintainers, a three-day foundation course, it is aimed at Mechanical/Hydraulic related staff who have no prior knowledge of Electrics/Electronics.
It is not specific to any routes or regions, nor as a result of an incident, it will however be used in safety critical maintenance of our Traction and Rolling Stock Plant.

Audience

Mechanical/Hydraulic related staff who have no prior knowledge of Electrics/Electronics.

Duration:

3 Days Day(s)

Class size:

Competence Name Awarded:

Undertake maintenance of electrical equipment and systems

Competence Awarded:

RVM 09

Course Code:

S1AE

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Stage 1 Electro-Pneumatics Pneumatics

Course Description

This training is essential for all F&E Maintainers, a three-day course designed for those maintaining fluid power systems involving pneumatics and control. It is not specific to any routes or regions, nor as a result of an incident, it will however be used in safety critical maintenance of our Traction and Rolling Stock Plant.

Audience

Mechanical/Hydraulic related staff who have no prior knowledge of Pneumatics.

Duration:

3 Days Day(s)

Class size:

Course Name

Stage 1 Electro-Pneumatics Pneumatics

Course Description

This training is essential for all F&E Maintainers, a three-day course designed for those maintaining fluid power systems involving pneumatics and control. It is not specific to any routes or regions, nor as a result of an incident, it will however be used in safety critical maintenance of our Traction and Rolling Stock Plant.

Audience

Mechanical/Hydraulic related staff who have no prior knowledge of Pneumatics.

Duration:

3 Days Day(s)

Class size:

Competence Name Awarded:

Undertake maintenance of hydraulic and pneumatic components and systems

Competence Awarded:

RVM 02

Course Code:

S1EP

Prerequisite Name:

Audience

Technical staff of less than 1 year experience. Staff with more than 1 year experience should book on to the Technical Officer Programme (Track)

Duration:

15 Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TONEP T

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Technical Officer Programme (Track)

Course Description

This programme is for experienced technical staff. The programme covers 2 separate modules Module 1: Track surveying, delegates are introduced and shown how to use an automatic level for design work associated with on track machines, with this they are shown how to correctly book the data so it can be used to create lift information, the 3rd part of the process is to use the data and turn it into lifts via the collimation method of reducing levels. Delegates are then introduced and shown how to use a theodolite for use of setting a design straight, also associated with on track machines. A very hands on practical module in both training and live railway environment. Module 2: This looks at manual geometry recording, the importance of highlighting issues/defects for rectification in a timely manner before a significant problem occurs, this includes management of the data, who it's issued to and what systems this feeds into. Second part of this module covers gauging, again the importance of why the inspections are carried out, the pitfalls of poorly managed clearances, this includes management of the data, who it's issued to and what systems this feeds into.

Audience

Technical staff of at least 1 year experience. Staff with less than 1 year experience should book on to the Technical Officer New Entrants Programme (Track)

Duration:

10 Day(s)

Class size:

12

Course Name

Technical Officer Programme (Track)

Course Description

This programme is for experienced technical staff. The programme covers 2 separate modules Module 1: Track surveying, delegates are introduced and shown how to use an automatic level for design work associated with on track machines, with this they are shown how to correctly book the data so it can be used to create lift information, the 3rd part of the process is to use the data and turn it into lifts via the collimation method of reducing levels. Delegates are then introduced and shown how to use a theodolite for use of setting a design straight, also associated with on track machines. A very hands on practical module in both training and live railway environment. Module 2: This looks at manual geometry recording, the importance of highlighting issues/defects for rectification in a timely manner before a significant problem occurs, this includes management of the data, who it's issued to and what systems this feeds into. Second part of this module covers gauging, again the importance of why the inspections are carried out, the pitfalls of poorly managed clearances, this includes management of the data, who it's issued to and what systems this feeds into.

Audience

Technical staff of at least 1 year experience. Staff with less than 1 year experience should book on to the Technical Officer New Entrants Programme (Track)

Duration:

10 Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

TOP T

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Description

An introduction module for the fundamentals of Longitudinal Bearers and associated structures.

Audience

Track Operatives / Technicians / Team Leaders who will be working on longitudinal bearer systems

Duration:

0.5 Day(s)

Class size:

Course Name

The Fundamentals of Longitudinal Bearers and associated structures

Course Description

An introduction module for the fundamentals of Longitudinal Bearers and associated structures.

Audience

Track Operatives / Technicians / Team Leaders who will be working on longitudinal bearer systems

Duration:

0.5 Day(s)

Class size:

Competence Name Awarded:

Competence Awarded:

Course Code:

LBS1

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Track-Ex Analysis System

Course Description

To enable delegates to effectively use, understand and interpret the Track-Ex software tool, and to gain a good understanding of the fundamental engineering principals that underpin Track-Ex.

To book onto this course, please contact Track-Ex@networkrail.co.uk and a member of the team will manage your request.

Audience

Personnel who are engaged with track maintenance, renewals or specification of track infrastructure, where they are required to operate the Track-Ex software. This may include technical staff, engineering staff or project staff.

Duration:

2 Day(s)

Class size:

10

Course Name

Track-Ex Analysis System

Course Description

To enable delegates to effectively use, understand and interpret the Track-Ex software tool, and to gain a good understanding of the fundamental engineering principals that underpin Track-Ex.

To book onto this course, please contact Track-Ex@networkrail.co.uk and a member of the team will manage your request.

Audience

Personnel who are engaged with track maintenance, renewals or specification of track infrastructure, where they are required to operate the Track-Ex software. This may include technical staff, engineering staff or project staff.

Duration:

2 Day(s)

Class size:

10

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

Track-Ex

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Track Geometry 1

Course Description

The aim of this module is to provide delegates with the skills and underpinning knowledge required to undertake the Tr 04 and Tr 11 competence.

Audience

Any persons required to undertake the Tr 04 and Tr 11 competence.

Duration:

7 Day(s)

Class size:

10

Course Name

Track Geometry 1

Course Description

The aim of this module is to provide delegates with the skills and underpinning knowledge required to undertake the Tr 04 and Tr 11 competence.

Audience

Any persons required to undertake the Tr 04 and Tr 11 competence.

Duration:

7 Day(s)

Class size:

10

Competence Name Awarded:

Restore track geometry by Manual Repair; Confirm the track is fit for operational purposes following maintenance repair.

Competence Awarded:

Tr 04; Tr 11

Course Code:

Track 04

Prerequisite Name:

Maintain permanent way assets; Maintain permanent way assets.Plain Line; Maintain permanent way assets.S&C.

Prerequisite Short Code:

Tr 01; Tr 01.01; Tr 01.02

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Track Geometry Supervisor

Course Description

At the end of the training the delegate will be able to: - State the role and responsibilities of the TGS - Explain the principles of mechanised maintenance processes for plain line track - Identify & plan preparation work - Describe the impact of mechanised maintenance on the safe operation of the railway - Describe the information requirements to be provided to the OTM operator(s) - Identify the structure clearances that may be affected when changing track geometry - Describe the marking up procedure - Demonstrate how to manage measurement and compensation using the various computerised systems available - Demonstrate how to manage geometry offset design using the various computerised systems available - Undertake the role and responsibility of the TGS during operation of the machine - Undertake the role and responsibility of the TGS on completion of the treatment works - Describe the geometrical tolerances that must be achieved when changing/restoring track geometry - Confirm the hand back of track for safe operational use.

Audience

Any persons required to undertake responsibilities in line with Tr 05.

Duration:

4 Day(s)

Class size:

8

Course Name

Track Geometry Supervisor

Course Description

At the end of the training the delegate will be able to: - State the role and responsibilities of the TGS - Explain the principles of mechanised maintenance processes for plain line track - Identify & plan preparation work - Describe the impact of mechanised maintenance on the safe operation of the railway - Describe the information requirements to be provided to the OTM operator(s) - Identify the structure clearances that may be affected when changing track geometry - Describe the marking up procedure - Demonstrate how to manage measurement and compensation using the various computerised systems available - Demonstrate how to manage geometry offset design using the various computerised systems available - Undertake the role and responsibility of the TGS during operation of the machine - Undertake the role and responsibility of the TGS on completion of the treatment works - Describe the geometrical tolerances that must be achieved when changing/restoring track geometry - Confirm the hand back of track for safe operational use.

Audience

Any persons required to undertake responsibilities in line with Tr 05.

Duration:

4 Day(s)

Class size:

8

Competence Name Awarded:

Establish track geometry and restore to operational condition by Mechanised Repair; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Geometry; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Measurement & Compensation; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Stoneblower. Establish track geometry and restore to operational condition by Mechanised Repair.Confirm line is fit for operational use, at the required line speed, following mechanised repair

Competence Awarded:

Tr 05; Tr 05.03; Tr 05.04; Tr 05.06; Tr 05.08

Course Code:

Track 05

Prerequisite Name:

Restore track geometry by Manual Repair.

Prerequisite Short Code:

Tr 04

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Track Geometry Supervisor S&C

Course Description

Provides the skills and knowledge required to carry out the role of Track Geometry Supervisor (Switches & Crossings). The course explains the effects of changing track geometry through switches and crossings and the different types of on-track machines and computerised systems available to undertake track geometry correction. It also covers how to plan and prepare for any track geometry work and how to confirm that the track is fit for operational use afterwards. This course can currently only be delivered by selected Network Rail trainers to Network Rail staff. No external training organisations are allowed to deliver this course at present

Audience

For anyone with track geometry supervisory responsibilities (including Tr 05.05 and Tr 05.07 responsibilities).

Duration:

2 Day(s)

Class size:

8

Course Name

Track Geometry Supervisor S&C

Course Description

Provides the skills and knowledge required to carry out the role of Track Geometry Supervisor (Switches & Crossings). The course explains the effects of changing track geometry through switches and crossings and the different types of on-track machines and computerised systems available to undertake track geometry correction. It also covers how to plan and prepare for any track geometry work and how to confirm that the track is fit for operational use afterwards. This course can currently only be delivered by selected Network Rail trainers to Network Rail staff. No external training organisations are allowed to deliver this course at present

Audience

For anyone with track geometry supervisory responsibilities (including Tr 05.05 and Tr 05.07 responsibilities).

Duration:

2 Day(s)

Class size:

8

Competence Name Awarded:

Establish track geometry and restore to operational condition by Mechanised Repair.TGS S&C; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Multi-Purpose Stoneblower.

Competence Awarded:

Tr 05.05; Tr 05.07

Course Code:

Tr05 S&C

Prerequisite Name:

Establish track geometry and restore to operational condition by Mechanised Repair.TGS Geometry; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Measurement & Compensation; Establish track geometry and restore to operational condition by Mechanised Repair.TGS Stoneblower.

Prerequisite Short Code:

Tr 05.03; Tr 05.04; Tr 05.06

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Track Induction

Course Description

To give delegates the basic underpinning knowledge of permanent way construction, components and working methods associated with maintenance, renewal, repair and dismantling of permanent way assets. Track Induction training is mandated by Network Rail for all staff who are new to track maintenance and renewal activities before undertaking this type of work on Network Rail Controlled Infrastructure.

Audience

Any persons who are new to track and whose work may involve the maintenance, inspection or renewal of the track or other duties that may affect the stability, position or integrity of the track infrastructure.

Duration:

3 Day(s)

Class size:

9

Course Name

Track Induction

Course Description

To give delegates the basic underpinning knowledge of permanent way construction, components and working methods associated with maintenance, renewal, repair and dismantling of permanent way assets. Track Induction training is mandated by Network Rail for all staff who are new to track maintenance and renewal activities before undertaking this type of work on Network Rail Controlled Infrastructure.

Audience

Any persons who are new to track and whose work may involve the maintenance, inspection or renewal of the track or other duties that may affect the stability, position or integrity of the track infrastructure.

Duration:

3 Day(s)

Class size:

9

Competence Name Awarded:

Track Induction

Competence Awarded:

Tr 00

Course Code:

TTF 001

Prerequisite Name:

Personal Track Safety. Manual Handling PTMP Core

Prerequisite Short Code:

PTS, HSE T9, PTMP 00 NEW

All staff required to carry out ultrasonic testing of rails.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Competence Awarded:

Course Code:

NDT 2Y RA

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Ultrasonic - Adjustment Switches U10

Course Description

Testing of adjustment switches.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

5

Course Name

Ultrasonic - Adjustment Switches U10

Course Description

Testing of adjustment switches.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

5

Competence Name Awarded:

Ultrasonic Inspection U10 - Testing of adjustment switches.

Competence Awarded:

NDT U10

Course Code:

NDT U10

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Alumino Thermic Head Repair U18

Course Description

Testing of aluminothermic weld repairs.

Audience

Rail testing operators.

Duration:

4 Day(s)

Class size:

4

Course Name

Ultrasonic - Alumino Thermic Head Repair U18

Course Description

Testing of aluminothermic weld repairs.

Audience

Rail testing operators.

Duration:

4 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Testing U18 - Testing of alumino thermic head repairs.

Competence Awarded:

NDT U18

Course Code:

NDT U18

Prerequisite Name:

Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS. Ultrasonic Inspection U16 - Testing of fishplated rail joints and holes using the Sperry RSU RTS. Ultrasonic Inspection U5 - Examination of squats and inspection of rail head repairs.

Prerequisite Short Code:

NDT U15; NDT U16; NDT U5

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Assessment of Squat Defects U5

Course Description

Assessment of squat defects.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

6

Course Name

Ultrasonic - Assessment of Squat Defects U5

Course Description

Assessment of squat defects.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

6

Competence Name Awarded:

Ultrasonic Inspection U5 - Examination of squats and inspection of rail head repairs.

Competence Awarded:

NDT U5

Course Code:

NDT U5

Prerequisite Name:

Ultrasonic Inspection U16 - Testing of fishplated rail joints and holes using the Sperry RSU RTS. Ultrasonic Inspection U8 - Confirmation and examination of vertical longitudinal defects.

Prerequisite Short Code:

NDT U16; NDT U8

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Bolthole Testing using Sperry RSU U16

Course Description

Bolthole testing using Sperry RSU.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Course Name

Ultrasonic - Bolthole Testing using Sperry RSU U16

Course Description

Bolthole testing using Sperry RSU.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U16 - Testing of fishplated rail joints and holes using the Sperry RSU RTS.

Competence Awarded:

NDT U16

Course Code:

NDT U16

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U15; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Crack Size Measurement U4

Course Description

Crack size measurement.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

6

Course Name

Ultrasonic - Crack Size Measurement U4

Course Description

Crack size measurement.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

6

Competence Name Awarded:

Ultrasonic Inspection U4 -Crack size estimation in manganese steels.

Competence Awarded:

NDT U4

Course Code:

NDT U4

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - GCC in Switchblades U5A

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Course Name

Ultrasonic - GCC in Switchblades U5A

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U5A - Rolling Contact Fatigue in reduced head rail section.

Competence Awarded:

NDT U5A

Course Code:

NDT U5A

Prerequisite Name:

Ultrasonic Inspection U5 - Examination of squats and inspection of rail head repairs.

Prerequisite Short Code:

NDT U5

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - GCC using Sperry RSU U15

Course Description

Full rail testing using Sperry RSU.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Course Name

Ultrasonic - GCC using Sperry RSU U15

Course Description

Full rail testing using Sperry RSU.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS.

Competence Awarded:

NDT U15

Course Code:

NDT U15

Prerequisite Name:

Personal Track Safety

Prerequisite Short Code:

PTS

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Rail Depth Measurement U7

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Course Name

Ultrasonic - Rail Depth Measurement U7

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U7 - Rail measurement.

Competence Awarded:

NDT U7

Course Code:

NDT U7

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Rail Testing Appreciation Course for Managers

Course Description

Rail testing appreciation course for managers.

Audience

Managers overseeing rail testing staff.

Duration:

3 Day(s)

Class size:

12

Course Name

Ultrasonic - Rail Testing Appreciation Course for Managers

Course Description

Rail testing appreciation course for managers.

Audience

Managers overseeing rail testing staff.

Duration:

3 Day(s)

Class size:

12

Competence Name Awarded:

Competence Awarded:

Course Code:

NDT App

Prerequisite Name:

Prerequisite Short Code:

Skills Assessment Scheme Regime:

Course Type:

How to Book

Course Name

Ultrasonic - Rail Testing Operator Course U1/U2

Course Description

Rail testing operator course (U1/U2).

Audience

Staff required to carry out ultrasonic testing of track.

Duration:

10 Day(s)

Class size:

8

Course Name

Ultrasonic - Rail Testing Operator Course U1/U2

Course Description

Rail testing operator course (U1/U2).

Audience

Staff required to carry out ultrasonic testing of track.

Duration:

10 Day(s)

Class size:

8

Competence Name Awarded:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Competence Awarded:

NDT U1; NDT U2

Course Code:

NDT U1/2

Prerequisite Name:

Personal Track Safety. Ultrasonic Inspection U5 - Examination of squats and inspection of rail head repairs. Ultrasonic Inspection U7 - Rail measurement. Ultrasonic Inspection U8 - Confirmation and examination of vertical longitudinal defects. Ultrasonic Inspection U15 - Testing of rail using the Sperry RSU RTS.

Prerequisite Short Code:

PTS, NDT U5, NDT U7, NDT U8, NDT U15

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic Testing of Rail Operator Training - Procedures U15 & U8

Course Description

The key aim of this course is to provide trainees with the underpinning knowledge and practical experience to obtain the competence certification required for the safe and effective operation of procedures U15 and U8 for the ultrasonic testing of rail.

Audience

This course is designed to train persons who are responsible for undertaking the ultrasonic testing of rail in track where they are required to carry out ultrasonic testing of rail using procedures U15 and U8 in their daily work.

Duration:

5 Day(s)

Class size:

8

Course Name

Ultrasonic Testing of Rail Operator Training - Procedures U15 & U8

Course Description

The key aim of this course is to provide trainees with the underpinning knowledge and practical experience to obtain the competence certification required for the safe and effective operation of procedures U15 and U8 for the ultrasonic testing of rail.

Audience

This course is designed to train persons who are responsible for undertaking the ultrasonic testing of rail in track where they are required to carry out ultrasonic testing of rail using procedures U15 and U8 in their daily work.

Duration:

5 Day(s)

Class size:

8

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

NDT U15 & U8

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Thermit Weld Testing U6

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Course Name

Ultrasonic - Thermit Weld Testing U6

Course Description

Assessment of GCC in reduced section rail.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U6 - Detection of fusion face defects in alumino thermic welds.

Competence Awarded:

NDT U6

Course Code:

NDT U6

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - U3, U8, U14

Course Description

Full rail testing, GCC & vertical longitudinal defects using NRS bi-directional stick only.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Course Name

Ultrasonic - U3, U8, U14

Course Description

Full rail testing, GCC & vertical longitudinal defects using NRS bi-directional stick only.

Audience

Rail testing operators.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U14 - Detection and sizing of gauge corner cracking (head checking). Ultrasonic Inspection U3 - Testing of rail using the 070 Rail Test System. Ultrasonic Inspection U8 - Confirmation and examination of vertical longitudinal defects.

Competence Awarded:

NDT U14; NDT U3; NDT U8

Course Code:

NDT U3, U8, U14

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Vertical/Corrosion Defects using Sperry RSU U17

Course Description

Vertical/corrosion defects using Sperry RSU.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Course Name

Ultrasonic - Vertical/Corrosion Defects using Sperry RSU U17

Course Description

Vertical/corrosion defects using Sperry RSU.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U17 - Verification of vertical defects in the rail foot using the Sperry RSU RTS.

Competence Awarded:

NDT U17

Course Code:

NDT U17

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonic - Vertical/Transverse Underfoot Defects U11

Course Description

Vertical/transverse underfoot defects.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Course Name

Ultrasonic - Vertical/Transverse Underfoot Defects U11

Course Description

Vertical/transverse underfoot defects.

Audience

Rail testing operators.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Ultrasonic Inspection U11 - Transverse/vertical cracks originating at underfoot corrosion.

Competence Awarded:

NDT U11

Course Code:

NDT U11

Prerequisite Name:

Ultrasonic Inspection U1 - Testing of fishplates. Ultrasonic Inspection U2 - Examination of rails not covered by U1 and U3.

Prerequisite Short Code:

NDT U1; NDT U2

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Ultrasonics On-site Assessments

Course Description

For assessments on site.

Audience

All staff required to carry out certain rail testing techniques.

Duration:

2 Day(s)

Class size:

12

Course Name

Ultrasonics On-site Assessments

Course Description

For assessments on site.

Audience

All staff required to carry out certain rail testing techniques.

Duration:

2 Day(s)

Class size:

12

Competence Name Awarded:

N/A

Competence Awarded:

N/A

Course Code:

NDT OS ASS

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

N/A

Course Type:

How to Book

Course Name

Undertake 053 Inspections

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called 'Undertake 053 Inspections Prequalifier'. This will take approximately 30 minutes to complete and can be downloaded if required. Once they have done this, they can then enrol in the 'Undertake 053 Inspections' face-to-face training event. These are designed to develop delegates who are responsible for Undertaking 053 Inspections as part of their duties on Network Rail Infrastructure. This requires that the inspections and subsequent actions detailed in the standard NR/L2/TRK/053 Issue 8 are undertaken correctly and by competent persons.

Audience

Suited to persons required to prove their capability in the area of ensuring that all facing switches are managed correctly to eliminate the known derailment risks. It would be desirable for delegates to have completed the Track Patrolling Training. However, this is not essential, as all delegates attending the course will be required to have completed the course pre-read.

Duration:

2 Day(s)

Class size:

6

Course Name

Undertake 053 Inspections

Course Description

This course is a two-part event. Delegates must enrol in the computer-based pre-reading on Oracle first, called 'Undertake 053 Inspections Prequalifier'. This will take approximately 30 minutes to complete and can be downloaded if required. Once they have done this, they can then enrol in the 'Undertake 053 Inspections' face-to-face training event. These are designed to develop delegates who are responsible for Undertaking 053 Inspections as part of their duties on Network Rail Infrastructure. This requires that the inspections and subsequent actions detailed in the standard NR/L2/TRK/053 Issue 8 are undertaken correctly and by competent persons.

Audience

Suited to persons required to prove their capability in the area of ensuring that all facing switches are managed correctly to eliminate the known derailment risks. It would be desirable for delegates to have completed the Track Patrolling Training. However, this is not essential, as all delegates attending the course will be required to have completed the course pre-read.

Duration:

2 Day(s)

Class size:

6

Competence Name Awarded:

Establish the operational condition of the Permanent Way by Detailed Inspection.053 Inspection.

Competence Awarded:

Tr07.01

Course Code:

TRK 7

Prerequisite Name:

Personal Track Safety

Prerequisite Short Code:

PTS

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Undertake Initial ESR Designs

Course Description

This course is designed for people who design Emergency Speed Restrictions. During the 3 days of training, delegates will complete numerous designs from a variety of scenarios.

It has been introduced as a result of a Signal Passed at Danger (SPaD) incident at Wootton Bassett Junction on 7th March 2015.

Following this incident, the Rail Accident Investigation Branch (RAIB) made a number of recommendations in their report (08/2016). A key recommendation was that emergency and temporary speed restrictions are designed and implemented in a way which results in clear and correct information being provided to train drivers.

Audience

Anyone undertaking ESR designs in accordance with NR/L3/TRK/7006 Creation and application of initial ESR design. The most likely audience are TME/ATME/SM[T] and Section Supervisor[T] role holders.

Duration:

3 Day(s)

Class size:

10

Course Name

Undertake Initial ESR Designs

Course Description

This course is designed for people who design Emergency Speed Restrictions. During the 3 days of training, delegates will complete numerous designs from a variety of scenarios.

It has been introduced as a result of a Signal Passed at Danger (SPaD) incident at Wootton Bassett Junction on 7th March 2015.

Following this incident, the Rail Accident Investigation Branch (RAIB) made a number of recommendations in their report (08/2016). A key recommendation was that emergency and temporary speed restrictions are designed and implemented in a way which results in clear and correct information being provided to train drivers.

Audience

Anyone undertaking ESR designs in accordance with NR/L3/TRK/7006 Creation and application of initial ESR design. The most likely audience are TME/ATME/SM[T] and Section Supervisor[T] role holders.

Duration:

3 Day(s)

Class size:

10

Competence Name Awarded:

Undertake Initial Emergency Speed Restriction Designs

Competence Awarded:

Tr 53

Course Code:

TTF53

Prerequisite Name:

N/A

Prerequisite Short Code:

N/A

Skills Assessment Scheme Regime:

4

Course Type:

How to Book

Course Name

Verify that track is fit to raise a permanent speed restriction

Course Description

This course is designed to develop delegates who are responsible for Verify that track is fit to raise a permanent speed restriction as part of their duties on Network Rail Infrastructure. It is designed to develop a person’s knowledge, understanding and skills and is therefore particularly suited to persons required to prove their capability in these areas.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress from roles of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

1 Day(s)

Class size:

8

Course Name

Verify that track is fit to raise a permanent speed restriction

Course Description

This course is designed to develop delegates who are responsible for Verify that track is fit to raise a permanent speed restriction as part of their duties on Network Rail Infrastructure. It is designed to develop a person’s knowledge, understanding and skills and is therefore particularly suited to persons required to prove their capability in these areas.

Audience

This course focuses on tactical management but is also aimed at delegates who aim to progress from roles of Track Maintenance Engineer (TME), Assistant Track Maintenance Engineer (ATME), Section Manager (SM (T)), Senior Asset Engineer (SAE), Principal Technical Officer (PTO) and Rail Maintenance Engineer (RME).

Duration:

1 Day(s)

Class size:

8

Competence Name Awarded:

Verify that track is fit to raise a permanent speed restriction

Competence Awarded:

TRK 504A

Course Code:

TRK 504A

Prerequisite Name:

Verify that track is fit to raise a permanent speed restriction prequalifier, Personal Track Safety, Individual Working Alone, Controller of Site Safety

Prerequisite Short Code:

TRK 504AP, PTS, IWA, COSS

Skills Assessment Scheme Regime:

5

Course Type:

How to Book