Switches and Crossings

Switches and Crossings

Course Name

Hy-Drive Conversion

Course Description

At the end of this training event, delegates will understand and/or be able to: Identification of system components. Perform signalling maintenance to the required specifications. Find and repair faults in line with themanufacturers operation.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the installation, Faulting or maintenance of the Hy-drive points system.

Duration:

3 Day(s)

Class size:

4

Course Name

Hy-Drive Conversion

Course Description

At the end of this training event, delegates will understand and/or be able to: Identification of system components. Perform signalling maintenance to the required specifications. Find and repair faults in line with themanufacturers operation.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the installation, Faulting or maintenance of the Hy-drive points system.

Duration:

3 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.In Bearer Undertake corrective and preventative maintenance of Rail Clamp Point Locks.SO Backdrives Install and adjust Rail Clamp Point Locks.In Bearer Installation

Competence Awarded:

Sig 12.01; Sig 12.03; Sig 34.01

Course Code:

STF 084

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.Rail Mounted OR Install and adjust Rail Clamp Point Locks.Rail Mounted Installation

Prerequisite Short Code:

Sig 12.02; Sig 34.02

Skills Assessment Scheme Regime:

3&4

Course Type:

This course requires Face to Face
How to Book

Course Name

IBCL Conversion

Course Description

This module is designed for people who are responsible for undertaking In Bearer Clamp Lock maintenance, installation and faulting as part of their duties on NR Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the Installation, maintenance or faulting of the IBCL points system.. Attendees for this event should already be competent in RCPL's(Rail Clamp Point Lock) and this is a 2 day event to convert from an RCPL competency. If no previous clam plock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead.

Duration:

2 Day(s)

Class size:

4

Course Name

IBCL Conversion

Course Description

This module is designed for people who are responsible for undertaking In Bearer Clamp Lock maintenance, installation and faulting as part of their duties on NR Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the Installation, maintenance or faulting of the IBCL points system.. Attendees for this event should already be competent in RCPL's(Rail Clamp Point Lock) and this is a 2 day event to convert from an RCPL competency. If no previous clam plock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks; Install and adjust Rail Clamp Point Locks; Undertake corrective and preventative maintenance of Rail Clamp Point Locks

Competence Awarded:

Sig 12; Sig 34.01; Sig 12.01

Course Code:

STF 083

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks. Rail Mounted OR Install and adjust Rail Clamp Point Locks. Rail Mounted Installation

Prerequisite Short Code:

Sig 12.02 OR Sig 34.02

Skills Assessment Scheme Regime:

Course Type:

This course requires Personal Protective Equipment This course requires Face to Face
How to Book

Course Name

Install, maintain and fault find Rail Clamplock MK3

Course Description

This course is designed to train persons who are responsible for undertaking the installation, fault finding and preventative maintenance on the Rail Clamplock MK3 as part of their duties on Network 
Rail Infrastructure.

Audience

This course is designed to upskill persons who are already competent on other types of clamplock equipment and will be taking on the MK3 as an additional competence.

Duration:

2 Days Day(s)

Class size:

6

Course Name

Install, maintain and fault find Rail Clamplock MK3

Course Description

This course is designed to train persons who are responsible for undertaking the installation, fault finding and preventative maintenance on the Rail Clamplock MK3 as part of their duties on Network 
Rail Infrastructure.

Audience

This course is designed to upskill persons who are already competent on other types of clamplock equipment and will be taking on the MK3 as an additional competence.

Duration:

2 Days Day(s)

Class size:

6

Competence Name Awarded:

Competence Awarded:

STF 410

Course Code:

Install, maintain and fault find Rail Clamplock MK3

Prerequisite Name:

Undertake corrective and maintenance of Signalling Power Supplies Undertake corrective and preventative maintenance of Signalling Cables Ensure effective progression of work and use of resources during signalling testing Take and relinquish responsibility for Signalling Equipment Implement and monitor safe working systems for signal engineering maintenance and renewal activities Undertake corrective and preventative maintenance of points fitting – Points Fitting Undertake corrective and preventative maintenance of rail clamp point lock point machines Install and adjust rail point clamp locks

Prerequisite Short Code:

Sig 13, 14, 24, 25, 26, 12, 34 & sig 39.01

Skills Assessment Scheme Regime:

Course Type:

This course requires Face to Face
How to Book

Course Name

Points Fittings

Course Description

Develops understanding of the maintenance, faulting, repairing and testing procedures that apply to point fittings, fixed stretcher bars, adjustable stretcher bars, supplementary drives and detectors.

Audience

Anyone responsible for the maintenance, faulting, repairing or testing of point fittings, fixed and adjustable stretcher bars, supplementatry drives and detectors signal engineering equipment.

Duration:

4 Day(s)

Class size:

6

Course Name

Points Fittings

Course Description

Develops understanding of the maintenance, faulting, repairing and testing procedures that apply to point fittings, fixed stretcher bars, adjustable stretcher bars, supplementary drives and detectors.

Audience

Anyone responsible for the maintenance, faulting, repairing or testing of point fittings, fixed and adjustable stretcher bars, supplementatry drives and detectors signal engineering equipment.

Duration:

4 Day(s)

Class size:

6

Competence Name Awarded:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Competence Awarded:

Sig 39; Sig 39.01

Course Code:

STF 060

Prerequisite Name:

Undertake corrective and preventative maintenance of Track Circuits; Undertake corrective and preventative maintenance of Electrical Signals including AWS and TPWS; Undertake corrective and preventative maintenance of Signalling Power Supplies; Undertake corrective and preventative maintenance of Signalling Cables; Signal Maintenance Testing.Core Skills Take and relinquish responsibility for Signalling equipment; Ensure effective progression of work and use of resources during signalling testing, maintenance or installation activities

Prerequisite Short Code:

Sig 05; Sig 07; Sig 13; Sig 14; Sig 23; Sig 24; Sig 25

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face
How to Book

Course Name

Points HPSS FLMF

Course Description

Provides knowledge and skills to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out preventative maintenance procedures and tests; complete recording and reporting documentation.

Audience

Anyone responsible for the maintenance, faulting repairing or testing of this system and who has at least 6 months workplace experience.

Duration:

5 Day(s)

Class size:

6

Course Name

Points HPSS FLMF

Course Description

Provides knowledge and skills to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out preventative maintenance procedures and tests; complete recording and reporting documentation.

Audience

Anyone responsible for the maintenance, faulting repairing or testing of this system and who has at least 6 months workplace experience.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.HPSA machines

Competence Awarded:

Sig 10; Sig 10.04

Course Code:

STF 70

Prerequisite Name:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake Corrective and Preventative Maintenance of Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face
How to Book

Course Name

Points HW FLMF

Course Description

By the end of this course delegates will have developed a comprehensive knowledge of the following learning objectives: An understanding of what procedures need to be followed to ensure operational and personal safety is maintained during work on type HW.

Audience

This course is designed to train persons who are responsible for the maintenance, faulting repairing or testing of the Signal Engineering equipment.Before attending this training a person should have successfully completed Point Fittings FLMF.

Duration:

5 Day(s)

Class size:

6

Course Name

Points HW FLMF

Course Description

By the end of this course delegates will have developed a comprehensive knowledge of the following learning objectives: An understanding of what procedures need to be followed to ensure operational and personal safety is maintained during work on type HW.

Audience

This course is designed to train persons who are responsible for the maintenance, faulting repairing or testing of the Signal Engineering equipment.Before attending this training a person should have successfully completed Point Fittings FLMF.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines. Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.Alstom Type HW machines

Competence Awarded:

Sig 10; Sig 10.02

Course Code:

STF 061

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings. Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face
How to Book

Course Name

Points HW Installation

Course Description

Provides an understanding of installation, adjustment and testing procedures that apply to HW Point Machines.

Audience

Anyone responsible for installation, adjustment or testing of the Signal Engineering equipment.

Duration:

4 Day(s)

Class size:

6

Course Name

Points HW Installation

Course Description

Provides an understanding of installation, adjustment and testing procedures that apply to HW Point Machines.

Audience

Anyone responsible for installation, adjustment or testing of the Signal Engineering equipment.

Duration:

4 Day(s)

Class size:

6

Competence Name Awarded:

Install and adjust Electro-mechanical Point Operating Systems; Install and adjust Electro-mechanical Point Operating Systems.HW Installation

Competence Awarded:

Sig 31; Sig 31.02

Course Code:

STF 062

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

4

Course Type:

This course requires Face to Face
How to Book

Course Name

Points Style 63 FLMF

Course Description

Provides knowledge and skills to be able to maintain, repair, adjust and test Style 63 Clamp Locks.

Audience

Anyone responsible for maintenance, adjustment or testing of the Signal Engineering equipment, have the required competences and not less than 12 months work experience in a signal maintenance, faulting, installation or testing environment.

Duration:

5 Day(s)

Class size:

6

Course Name

Points Style 63 FLMF

Course Description

Provides knowledge and skills to be able to maintain, repair, adjust and test Style 63 Clamp Locks.

Audience

Anyone responsible for maintenance, adjustment or testing of the Signal Engineering equipment, have the required competences and not less than 12 months work experience in a signal maintenance, faulting, installation or testing environment.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.W, B, & S Co M63 machines

Competence Awarded:

Sig 10; Sig 10.09

Course Code:

STF 068

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face
How to Book

Course Name

RCPL / IBCL - Installation, Faulting and Maintenance

Course Description

This module is designed to train persons who are responsible for undertaking Rail Clamp Point Lock or In Bearer Clamp Lock maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation or Faulting where equipment is installed. Signalling grades whose work involves the installation / maintenance of the RCPL or IBCL points system.. Attendees for this event should be new to Clamplocks. If IBCL is required and RCPL is already held then STFxx IBCL conversion or STFxx HY-Drive Conversion should be considered.

Duration:

5 Day(s)

Class size:

6

Course Name

RCPL / IBCL - Installation, Faulting and Maintenance

Course Description

This module is designed to train persons who are responsible for undertaking Rail Clamp Point Lock or In Bearer Clamp Lock maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation or Faulting where equipment is installed. Signalling grades whose work involves the installation / maintenance of the RCPL or IBCL points system.. Attendees for this event should be new to Clamplocks. If IBCL is required and RCPL is already held then STFxx IBCL conversion or STFxx HY-Drive Conversion should be considered.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Install and adjust Rail Clamp Point Locks.Rail Mounted Installation, Undertake corrective and preventative maintenance of Rail Clamp Point Locks, Install and adjust Rail Clamp Point Locks, Undertake corrective and preventative maintenance of Rail Clamp Point Locks.In Bearer, Undertake corrective and preventative maintenance of Rail Clamp Point Locks.Rail Mounted, Install and adjust Rail Clamp Point Locks.In Bearer Installation

Competence Awarded:

Sig 34.02; Sig 12; Sig 34; Sig 12.01; Sig 12.02; Sig 34.01

Course Code:

STF 081

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings. Points Fittings

Prerequisite Short Code:

Sig 39.01

Skills Assessment Scheme Regime:

Course Type:

This course requires Face to Face This course requires Personal Protective Equipment
How to Book

Course Name

SO Supplementary Drive

Course Description

This module is designed to train persons who are responsible for undertaking SO Supplementary Drive maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation and Faulting where equipment is installed. Signalling maintenance grades whose work involves the maintenance, Installation or Faulting of the SO Supplementary drive system.. Attendees for this event should already be competent in IBCL's (In-Bearer Clamplock) and this is a 1 day event to convert from an IBCL competency. If no previous Clamplock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead before attendance of the 1 day SO event. If RCPL held and IBCL not held then the HY-Drive conversion event (3days STFxx) should be considered.

Duration:

1 Day(s)

Class size:

4

Course Name

SO Supplementary Drive

Course Description

This module is designed to train persons who are responsible for undertaking SO Supplementary Drive maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation and Faulting where equipment is installed. Signalling maintenance grades whose work involves the maintenance, Installation or Faulting of the SO Supplementary drive system.. Attendees for this event should already be competent in IBCL's (In-Bearer Clamplock) and this is a 1 day event to convert from an IBCL competency. If no previous Clamplock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead before attendance of the 1 day SO event. If RCPL held and IBCL not held then the HY-Drive conversion event (3days STFxx) should be considered.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.SO Backdrives

Competence Awarded:

Sig 12.03

Course Code:

STF 082

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks. In Bearer OR Install and adjust Rail Clamp Point Locks. In Bearer Installation

Prerequisite Short Code:

Sig 12.01 OR Sig 34.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face This course requires Personal Protective Equipment
How to Book

Course Name

Tubular Stretcher Bar

Course Description

Provides skills and knowledge to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out maintenance, installation and adjustment procedures and tests for the equipment; complete recording and reporting documentation.

Audience

Anyone who is competent in sig 39.01 and responsible for carrying out routine installation, maintenance and test of the tubular stretcher bar.

Duration:

1 Day(s)

Class size:

6

Course Name

Tubular Stretcher Bar

Course Description

Provides skills and knowledge to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out maintenance, installation and adjustment procedures and tests for the equipment; complete recording and reporting documentation.

Audience

Anyone who is competent in sig 39.01 and responsible for carrying out routine installation, maintenance and test of the tubular stretcher bar.

Duration:

1 Day(s)

Class size:

6

Competence Name Awarded:

Install and Maintain Tubular Stretcher Bar.

Competence Awarded:

Sig 58

Course Code:

STF 066

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39.01

Skills Assessment Scheme Regime:

5

Course Type:

This course requires Face to Face
How to Book

Course Name

Hy-Drive Conversion

Course Description

At the end of this training event, delegates will understand and/or be able to: Identification of system components. Perform signalling maintenance to the required specifications. Find and repair faults in line with themanufacturers operation.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the installation, Faulting or maintenance of the Hy-drive points system.

Duration:

3 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.In Bearer Undertake corrective and preventative maintenance of Rail Clamp Point Locks.SO Backdrives Install and adjust Rail Clamp Point Locks.In Bearer Installation

Competence Awarded:

Sig 12.01; Sig 12.03; Sig 34.01

Course Code:

STF 084

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.Rail Mounted OR Install and adjust Rail Clamp Point Locks.Rail Mounted Installation

Prerequisite Short Code:

Sig 12.02; Sig 34.02

Skills Assessment Scheme Regime:

3&4

Course Type:

This course requires Face to Face

How to Book

Course Name

IBCL Conversion

Course Description

This module is designed for people who are responsible for undertaking In Bearer Clamp Lock maintenance, installation and faulting as part of their duties on NR Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance where equipment is installed. Signalling grades whose work involves the Installation, maintenance or faulting of the IBCL points system.. Attendees for this event should already be competent in RCPL's(Rail Clamp Point Lock) and this is a 2 day event to convert from an RCPL competency. If no previous clam plock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead.

Duration:

2 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks; Install and adjust Rail Clamp Point Locks; Undertake corrective and preventative maintenance of Rail Clamp Point Locks

Competence Awarded:

Sig 12; Sig 34.01; Sig 12.01

Course Code:

STF 083

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks. Rail Mounted OR Install and adjust Rail Clamp Point Locks. Rail Mounted Installation

Prerequisite Short Code:

Sig 12.02 OR Sig 34.02

Skills Assessment Scheme Regime:

Course Type:

This course requires Personal Protective Equipment This course requires Face to Face

How to Book

Course Name

Install, maintain and fault find Rail Clamplock MK3

Course Description

This course is designed to train persons who are responsible for undertaking the installation, fault finding and preventative maintenance on the Rail Clamplock MK3 as part of their duties on Network 
Rail Infrastructure.

Audience

This course is designed to upskill persons who are already competent on other types of clamplock equipment and will be taking on the MK3 as an additional competence.

Duration:

2 Days Day(s)

Class size:

6

Competence Name Awarded:

Competence Awarded:

STF 410

Course Code:

Install, maintain and fault find Rail Clamplock MK3

Prerequisite Name:

Undertake corrective and maintenance of Signalling Power Supplies Undertake corrective and preventative maintenance of Signalling Cables Ensure effective progression of work and use of resources during signalling testing Take and relinquish responsibility for Signalling Equipment Implement and monitor safe working systems for signal engineering maintenance and renewal activities Undertake corrective and preventative maintenance of points fitting – Points Fitting Undertake corrective and preventative maintenance of rail clamp point lock point machines Install and adjust rail point clamp locks

Prerequisite Short Code:

Sig 13, 14, 24, 25, 26, 12, 34 & sig 39.01

Skills Assessment Scheme Regime:

Course Type:

This course requires Face to Face

How to Book

Course Name

Points Fittings

Course Description

Develops understanding of the maintenance, faulting, repairing and testing procedures that apply to point fittings, fixed stretcher bars, adjustable stretcher bars, supplementary drives and detectors.

Audience

Anyone responsible for the maintenance, faulting, repairing or testing of point fittings, fixed and adjustable stretcher bars, supplementatry drives and detectors signal engineering equipment.

Duration:

4 Day(s)

Class size:

6

Competence Name Awarded:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Competence Awarded:

Sig 39; Sig 39.01

Course Code:

STF 060

Prerequisite Name:

Undertake corrective and preventative maintenance of Track Circuits; Undertake corrective and preventative maintenance of Electrical Signals including AWS and TPWS; Undertake corrective and preventative maintenance of Signalling Power Supplies; Undertake corrective and preventative maintenance of Signalling Cables; Signal Maintenance Testing.Core Skills Take and relinquish responsibility for Signalling equipment; Ensure effective progression of work and use of resources during signalling testing, maintenance or installation activities

Prerequisite Short Code:

Sig 05; Sig 07; Sig 13; Sig 14; Sig 23; Sig 24; Sig 25

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face

How to Book

Course Name

Points HPSS FLMF

Course Description

Provides knowledge and skills to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out preventative maintenance procedures and tests; complete recording and reporting documentation.

Audience

Anyone responsible for the maintenance, faulting repairing or testing of this system and who has at least 6 months workplace experience.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.HPSA machines

Competence Awarded:

Sig 10; Sig 10.04

Course Code:

STF 70

Prerequisite Name:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake Corrective and Preventative Maintenance of Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face

How to Book

Course Name

Points HW FLMF

Course Description

By the end of this course delegates will have developed a comprehensive knowledge of the following learning objectives: An understanding of what procedures need to be followed to ensure operational and personal safety is maintained during work on type HW.

Audience

This course is designed to train persons who are responsible for the maintenance, faulting repairing or testing of the Signal Engineering equipment.Before attending this training a person should have successfully completed Point Fittings FLMF.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines. Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.Alstom Type HW machines

Competence Awarded:

Sig 10; Sig 10.02

Course Code:

STF 061

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings. Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face

How to Book

Course Name

Points HW Installation

Course Description

Provides an understanding of installation, adjustment and testing procedures that apply to HW Point Machines.

Audience

Anyone responsible for installation, adjustment or testing of the Signal Engineering equipment.

Duration:

4 Day(s)

Class size:

6

Competence Name Awarded:

Install and adjust Electro-mechanical Point Operating Systems; Install and adjust Electro-mechanical Point Operating Systems.HW Installation

Competence Awarded:

Sig 31; Sig 31.02

Course Code:

STF 062

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

4

Course Type:

This course requires Face to Face

How to Book

Course Name

Points Style 63 FLMF

Course Description

Provides knowledge and skills to be able to maintain, repair, adjust and test Style 63 Clamp Locks.

Audience

Anyone responsible for maintenance, adjustment or testing of the Signal Engineering equipment, have the required competences and not less than 12 months work experience in a signal maintenance, faulting, installation or testing environment.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines; Undertake corrective and preventative maintenance of Electro-Mechanical Point Machines.W, B, & S Co M63 machines

Competence Awarded:

Sig 10; Sig 10.09

Course Code:

STF 068

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings; Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39; Sig 39.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face

How to Book

Course Name

RCPL / IBCL - Installation, Faulting and Maintenance

Course Description

This module is designed to train persons who are responsible for undertaking Rail Clamp Point Lock or In Bearer Clamp Lock maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation or Faulting where equipment is installed. Signalling grades whose work involves the installation / maintenance of the RCPL or IBCL points system.. Attendees for this event should be new to Clamplocks. If IBCL is required and RCPL is already held then STFxx IBCL conversion or STFxx HY-Drive Conversion should be considered.

Duration:

5 Day(s)

Class size:

6

Competence Name Awarded:

Install and adjust Rail Clamp Point Locks.Rail Mounted Installation, Undertake corrective and preventative maintenance of Rail Clamp Point Locks, Install and adjust Rail Clamp Point Locks, Undertake corrective and preventative maintenance of Rail Clamp Point Locks.In Bearer, Undertake corrective and preventative maintenance of Rail Clamp Point Locks.Rail Mounted, Install and adjust Rail Clamp Point Locks.In Bearer Installation

Competence Awarded:

Sig 34.02; Sig 12; Sig 34; Sig 12.01; Sig 12.02; Sig 34.01

Course Code:

STF 081

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings. Points Fittings

Prerequisite Short Code:

Sig 39.01

Skills Assessment Scheme Regime:

Course Type:

This course requires Face to Face This course requires Personal Protective Equipment

How to Book

Course Name

SO Supplementary Drive

Course Description

This module is designed to train persons who are responsible for undertaking SO Supplementary Drive maintenance and faulting activities as part of their duties on Network Rail Infrastructure.

Audience

Personnel who are responsible for: Routine signalling maintenance, Installation and Faulting where equipment is installed. Signalling maintenance grades whose work involves the maintenance, Installation or Faulting of the SO Supplementary drive system.. Attendees for this event should already be competent in IBCL's (In-Bearer Clamplock) and this is a 1 day event to convert from an IBCL competency. If no previous Clamplock competencies held then STF xx Full RCPL / IBCL event 5 days should be attended instead before attendance of the 1 day SO event. If RCPL held and IBCL not held then the HY-Drive conversion event (3days STFxx) should be considered.

Duration:

1 Day(s)

Class size:

4

Competence Name Awarded:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks.SO Backdrives

Competence Awarded:

Sig 12.03

Course Code:

STF 082

Prerequisite Name:

Undertake corrective and preventative maintenance of Rail Clamp Point Locks. In Bearer OR Install and adjust Rail Clamp Point Locks. In Bearer Installation

Prerequisite Short Code:

Sig 12.01 OR Sig 34.01

Skills Assessment Scheme Regime:

3

Course Type:

This course requires Face to Face This course requires Personal Protective Equipment

How to Book

Course Name

Tubular Stretcher Bar

Course Description

Provides skills and knowledge to be able to identify what each of the component parts being installed contributes to the overall operation of the system; describe what your role and responsibilities and authorities are; carry out maintenance, installation and adjustment procedures and tests for the equipment; complete recording and reporting documentation.

Audience

Anyone who is competent in sig 39.01 and responsible for carrying out routine installation, maintenance and test of the tubular stretcher bar.

Duration:

1 Day(s)

Class size:

6

Competence Name Awarded:

Install and Maintain Tubular Stretcher Bar.

Competence Awarded:

Sig 58

Course Code:

STF 066

Prerequisite Name:

Undertake Corrective and Preventative Maintenance of Points Fittings.Points Fittings

Prerequisite Short Code:

Sig 39.01

Skills Assessment Scheme Regime:

5

Course Type:

This course requires Face to Face

How to Book